PLMRMP2A 2 CHANNEL WATERPROOF MP3/Ipod MARINE POWER AMPLIFIER PLMRMP4A 4 CHANNEL WATERPROOF MP3/Ipod MARINE POWER AMPLIFIER OWNER’S MANUAL
Thank you for making a PLYE your choice marine for audio entertainment! It’s compact, waterproof design allows for flexible mounting possibilities, and makes it simple to expand the audio system capabilities for vehicle.
PLMRMP4A FEATARES: ● 4 x 150 Watts RMS at 4 ohm ●4 x 300 Watts MAX at 4 ohm ●4 x 500 Watts RMS at 2 ohm ●Electronic Crossover Network ●2 Ohm Stereo Stable ●Anti-Thump Turn- On ●Soft Turn On / Off ●Adjustable High / Low Level Inputs ●RCA Line Input ●Power Protection Circuitry ●Volume Gain Remote Control ●T.H.D S/N Ratio : > 95 dB ●Channel Separation : > 65 dB ●Frequency Response : 10 – 40K Hz ●Fuse : 10 A ●Dimensions : 6.18''(L) x 3.50''(W) x 2.05''(H) Accessories: • IPod / MP3 / Waterproof 3.
Installation precautions Before you drill or cut any holes, investigate your vessel’s layout very carefully. Take special care when you work near the gas tank, fuel lines, hydraulic lines and electrical wiring. Never operate the amplifier when it is unmouned. Attach all audio system components securely within the amplifier to prevent damage, especially in an accident. Do not mount this amplifier so that wire connections are unprotected.
Controls, Input and Output Cables: 1 2 3 dB GAIN + MIN MAX 4 5 The switches and gain settings are located behind a watertight pulg, which also lights up when the amplifier is on. Be sure to replace the plug when finished with adjustments 1 The INPUT LEVEL switch selects the input sensitivity of the amplifier. If you are connecting to a LINE level source (typically any RCA type connection) then the switch should be in the LINE (out) position.
4 VOLUME CONTROL Plug for the waterproof remote volume control. When installed, this control will turn off the PLMRMP3A Amp when turned all the way down.
www.pyleaudio.