OPERATING INSTRUCTIONS INDASH AM/FM DVD/CD/MP3 PLAYER MODEL PLDVD170
FEATURES POWER +20% Operating voltage range: 12V -10% DC. Low power consumption design. COMPATIBILITY This DVD player can play the following discs: DVD, CD, VCD, DVCD, MP3, CD-R,CD-RW . SYSTEM FUNCTIONS VIDEO OUTPUT SYSTEM System AUTO , NTSC, PAL or PAL M switchable. TV TYPE [4:3LB], [4:3PS] or [16:9] will be selected conforming to the actual monitor in use. AUDIO OUTPUT 2 channel Dobly digital output and supports analog output of MPEG-1, MPEG-2 layer 2 and MP3.
TABLE OF CONTENTS Introduction ------------------------------------------------------------------------------ 1-7 Safety precautions ------------------------------------------------------------------------------------Important instructions -------------------------------------------------------------------------------Precautions ---------------------------------------------------------------------------------------------Identification of controls -------------------------------------------------------------
SAFETY PRECAUTIONS +20% This digital versatile disc (DVD) video player uses 12V -10% DC. For future reference, record the model and serial number (located on the case of the DVD player) in the space provided. S/N: Date: CAUTION: THIS DVD VIDEO PLAYER IS A CLASS IIa LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
IMPORTANT INSTRUCTIONS 1. Owner's manual 11. Accessories After unpacking this product, read the owner's Any mounting of the product should follow the manual carefully, heed all warnings and instrucmanufacture's instructions, and should use tions given in this manual and those marked on the a mounting accessories recommended by the unit ,and follow all the operating and other instrucmanufacturer. Make sure the player is tions. Keep this booklet for future reference. securely mounted.
PRECAUTIONS Notes on handling When shipping the DVD player, the original shipping carton and packing materials must be used. For maximum protection, re-pack the unit as it was originally packed at the factory. Do not use volatile liquids, such as aerosol spray, near the DVD player. Do not leave any plastic products in contact with the DVD player for a long period of time. They will leave marks on the finish. The top and rear panels of the DVD player may become warm after a long period of use.
Identification of controls See the page in for the details. Front panel(Fold down design panel ) 11 Display POWER button DVD/RADIO 12 5 12 OPEN button VOL(+,-) button 18 SKIP button SEEK MEMORY/MUTE 15 24 26 11 26 12 12 17 PLAY, PAUSE, BAND button 17 18 ENTER STOP MENU SCAN/SEL.
Identification of controls DVD display Repeat indicator Band indicator Operating status indicator Dolby Digital indicator MP3/DVD/VIDEO CD indicator dts indicator DVD AMFM Title indicator Chapter indicator ST Total playing time/elapsed indicator The indicators vary depending on the kinds of discs you play.
Identification of controls Full direction Remote control The instructions in this manual describe the functions on the remote control. See the page in for the details. Remote control operation The button on the remote POWER Power on/off . 11 MUTE Playing without sound Using the on-screen display 17 21 To play repeatedly 17 DISPLAY RPT.
When using remote control Preparing the remote control Insert the batteries into the remote control so you can use it to operate the DVD video player. Make sure to match the +and - on the lithium button cell(3V, CR2025) to the marks inside the cell compartment. 1) Open the cover, pull the cover as illustrated 2)Insert cell (3V),Close the cover Operating with the remote control 1)This section shows you how to use the remote control. Point the remote control at the remote sensor and press the buttons.
Connections Outlet wires connection (supplied) ON OFF 13 1 2 3 4 5 6 7 8 9 10 11 12 13 1 YELLOW CABLE [VIDEO/AUDIO]: VIDEO OUT(YELLOW); DIGITAL AUDIO OUT(ORANGE /YELLOW) [Go to page 9] 2 BLACK CABLE [AMPLIFIER] : 3 PURPLE CABLE : 4 PURPLE CABLE : 5 BROWN CABLE: AUDIO OUT: Red right; White left [Go to page 9] POWER ANTENNA (Purple) AMPLIFIER TURN ON(Purple with white stripe) POWER SCREEN 6 GREEN CABLE [FRONT LEFT SPEAKER] : GREEN(+); GREEN WITH WHITE STRIPE(- ) 7 GREY CABLE [FRONT RIGHT SP
Connecting to a monitor and speakers , or audio system Antenna jack Remote sensor and remote control eye jack. Connect the remote control eye jack to the remote sensor unit. Note: 1)Refer to the amplifier’s owner’ s manual and set the Functions Setting ( Audio, Digital out)----See page 23. 2)When playing DVD video discs or audio CDs encoded via the DTS recording, please use the coaxial cable . And the Audio Setting please refer to page 19.
Connecting AMP Select Press AMP SEL button on the remote repeatedly, select the amplifier mode you need ( depending on the connection mode).
Playing a disc This section shows you the basics on how to play a disc. To obtain a higher quality picture Occasionally, some picture noise not usually visible during a normal broadcast may appear on the monitor screen while playing a DVD disc. This distortion is because the high resolution picture depends on the monitor you use with this DVD player. You should generally reduce the sharpness adjustment on your monitor when viewing DVD discs.
Playing a disc To start playback from the menu screen 1 Press5/6/3/4 or the number buttons on the remote to select the title you want. -- title number over 10 To input 13: press 1 and 3 . -- MP3 discs To input 25: press 2 and 5 ; ENTER SEEKTo input 112: press 1and 1then2. SEEK+ 2 Press ENTER button The DVD player begins playback from the selected title. When not using the menu screen of a PBC- featured VIDEO CD, set "PBC" to "off " via the on-screen displays. To pause playback Press or during playback.
Playing a disc DVD Playing at various speeds VCD Press 7or8 on the remote during playback, or press and hold the SKIP button on the front panel for more than 1 second , the player plays in 7 ,8 mode. Each time you press the7 or8 button, the playback speed changes. 8: Fast forward playback On Screen X2 the normal speed X2 X4 the normal speed X8 the normal speed X8 X4 X20 the normal speed X20 7: Fast reverse playback On Screen X2 X4 X8 X20 Press PLAY return to the normal speed playback .
Advanced playback DVD VCD CD MP3 Resuming playback from the same location You can stop playback and resume playback later from the same location on the disc. 1 Press STOP at the location where you want to interrupt playback. The DVD player memorizes the location where playback is stopped. STOP(Play to resume) appears on the screen. 2 Press PLAY The DVD player resumes playback from the location where you stopped playback.
Advanced playback DVD Locating a specific title, chapter, or track VCD CD MP3 Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into tracks, you can quickly locate any specific title, chapter, or track.
Advanced playback DVD Play Mode VCD CD MP3 You can play in deferent mode. In the stop mode, press the PLAY MODE button on the remote, the following menu appears on the screen. And with the ENTER button you can change the mode as: PBC( for VCD), Program, Off, Shuffle. When you select one mode, move the cursor to OK then press ENTER. 1) For Program, the playback starts in program mode. Play Mode 2) Press PLAY button, For PBC, the playback starts in PBC on mode. For Off, the playback starts in no mode.
Advanced playback DVD Playing repeatedly VCD CD MP3 Repeating a title, chapter, or track You can play the same track or disc repeatedly. While playing, each time you press the RPT. (REPEAT) button, the repeat mode changes as follows. Playing VCD/ CD/MP3 Repeats the same track Playing DVD Single Repeats the same chapter Repeats the entire disc All Repeats the same title Title Resumes normal playback Off Resumes normal playback Off Chapter Note: Some discs may not permit repeat operation.
Advanced playback DVD Selecting sound VCD CD MP3 With the VOL+, VOL- button, you can change the volume. When the setting appears on the screen, press 34 to change the volume. Volume changes from 0 to 36: Volume 36 In radio mode, VOL XX( volume level 0~36) appears on the front panel. NOTE: The VOLUME setting is not cleared when: 1) you turn the power off, 2) you eject the disc 3) you change the disc.
Advanced playback DVD Selecting a playback audio setting VCD Good morning! Bonjour! ! Buenos dias! FOR DVD DISCS You can select a preferred language from those included on the disc. 1 While playing press AUDIO, the current audio setting appears. 2 Each time you press the AUDIO, the audio setting included on the DVD video disc changes.
Advanced playback Selecting the camera angle DVD ANGLE [1/2] ANGLE [2/2] You can select a preferred camera angle to watch a scene. If the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are watching. 1 Press ANGLE button , if the total angle number included on the disc is more than 1, then the angle icon is displayed. X/X Total angle number Current angle number 2 Each time you press the ANGLE button , the camera angle changes.
Function setup DVD Using the on-screen display You can view information about a disc and its operational status on the screen. Checking the operational status Press the DISPLAY button, the on-screen display on the screen.
Function setup DVD Customizing the function settings Press SETUP during stop. The setting menu appears. Press 5,6,3,4 button to move the cursor to the item, then press ENTER to select the item you want.
Function setup Audio Language Video Audio Rating Digital Audio Dolby D Off DTS Off MP3 Off Others Off Off PCM Raw Off PCM Off Raw Off PCM Raw When using the coaxial cable(see page9), you should set Digital Out PCM or Raw. Refer to the amplifier’s owner’s manual and make the setting Raw or PCM. Select one mode, if there is no sound change to the other one. Rating Language Video Audio Rating Password Rating ---1 Kid Safe 2. G 3. PG 4. PG-13 5. PG-R 6. R 7. NC-17 8.
MP3 Instruction Insert the MP3 disc then playback start, the MENU of elapsed track appears. MP3 Track XX/XXX XX:XX:XX Total track number Elapsed track 1 2 3 4 5 6 7 TRACK25 TRACK26 TRACK27 TRACK28 TRACK29 TRACK30 TRACK31 8 9 10 11 12 13 14 TRACK32 TRACK33 TRACK34 TRACK35 TRACK36 TRACK37 TRACK38 Set the MENU on or off by pressing the MENU button on the remote.
Radio operation VOL(+,-) button Front panel operation PWR DVD/RADIO button OPEN PWR MULTI-MEDIA DISC PLAYER RECEIVER DVD/RADIO ST VOL Current band ST FM Current station SKIP SEEK BAND Current frequency MEMORY SCAN STOP MENU ENTER RPT. AUDIO MUTE SEEK button BAND button Storing Preset Station MEMORY/MUTE SCAN/SEL 1 Selecting radio mode Press the DVD/RADIO button less than 1 second to switch from DVD player mode to the radio mode.
Radio operation 3 (Auto Travel Preset) operation When you are driving in an unfamiliar location and want to memorize local stations without changing the standard preset stations(5 FM F2 and 5 LW A2). A total 10 stations (5 FM F2 and 5 LW A2) can be programmed. To set the stations ....see the [ the RADIO TUNING on page 25] 4 Adjusting the volume Turn up or down the volume with the button VOL+, VOL-. 1.If no station can be received, " ----- " appears in the display for the empty channel. 2.
Others Safety As the laser beam used in this unit is harmful to the eyes, do not attempt to disassemble the unit. Refer servicing to qualified personnel only. Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further. Power sources The operating voltage is indicated on the nameplate at the cover of the player. If you are not going to use the player for a long time, be sure to turn off the unit.
NOTES on discs How to deal with discs How to hold a disc Do not touch the surface of the information side. When there are stains on the face of disc Wipe with a wet cloth and then with a dry one. Wipe from the center of the disc to the outer edge. When a disc is brought from a cold environment to a hot one, there could be steam on the face of disc. Wipe with a dry, soft, smooth cloth before using. Attention Do not write on dics. Do not use pickup cleaning preparation.
Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult a professional mobile video installer. There's no sound 1 Check that the player is connected securely and correctly. 2 Make sure you operate the monitor or the amplifier correctly. There's no picture 1 Check that the player is connected securely.
Specifications Audio Audio output(analog): 2±0.2V 100kΩ Audio output(digital): 0.5V 75Ω Signal-to-noise ratio: more than 90dB Dynamic range: more than 90dB Distortion: less than 0.05% Video Video output: Resolution: Speaker output load impedance: Power 1±0.
Accessories and Hardware Installation Mounting Bracket (Half Sleeve) X 1 Rear Strap (Brace) X 1 Hex bolt M5 x 14 X2 Mounting Screw M5 (equipped on the rear of the unit) X1 Mounting Grommet X1 Set Removal Removable Trim Ring equipped on the unit X1 Unlock Levers X2 CABLE Connection cable x 1 REMOTE CONTROL CLOCK POWER DI RASPLAY DIO/D VD CLE AR 0 1 2 4 5 7 8 DIS PLAY 3 6 ANGLE ST 9 BAND PLAYMODE S EEK- + E NTER SETUP SEEK + GOTO SCAN SUB 3 V MENU TI TLE MEM + VOL AUDIO
Note Remove this CD stopper before use. Apply the paper cover (supplied) on the screw hole to keep out dust. Remove this CD stopper before use. Apply the paper cover (supplied) on the screw hole to keep out dust. Two black sticking papers There are 2 mounting screws on the case of the DVD player( as above figure shows) to protect the unit during shipping. You need to remove the sticking papers and screws after unpacking this product.
