- Pyle OWNER'S MANUAL Mobile Video System PLTV165

12
OPERATION
Auto Searching channels
Press AUTO button (12) on the
monitor panel or AUTO button (23)
on the remote control to enter into
auto searching mode, then press
CHANNEL button (14) on the
monitor panel or CHANNEL button
(26) on remote control t to start
searching TV channels. Then press
CHANNEL button (15) on the
monitor panel for about one seconds
or press CHANNEL button (27) on
the remote control to stop searching.
Volume adjustment
Press VOLUME / buttons (8&9) or
VOLUME / buttons (24&25) to
adjust volume level.
Screen display
Press DSP button (29) on remote
control to display the current status
such as TVch /AV1/AV2. If you don't
operate for over 5 seconds, the
information on the screen will
disappear.
4:3/16:9 Selector
Slide the 4:3/16:9 switch (16) on the
monitor panel to select appropriate
TV aspect (4:3 or 16:9).
^
^
^
^
SPECIFICATION
GENERAL
Power Supply Requirements: : DC 12 Volts, Negative Ground
TV
Monitor Screen Size : 6.5"TFT
Resolution : 1440x234 dots
TV Sensitivity : 40dB