5" CEILING MOUNT TFT-LCD MONITOR PLVW1550IR
Table of Contents 1. Table of Contents------------------------------------------------------ 1 2. Warning ---------------------------------------------------------------- 1 3. Usage Notice ---------------------------------------------------------- 2 4. Package ---------------------------------------------------------------- 3 5. Function Descriptions ----------------------------------- --------------4 6. Start Your Installation ------------------------------------------------- 4 7.
Usage Notice Follow all warnings, precautions and maintenance as recommended in this user's manual to maximize the life of your LCD monitor To avoid the damage of the LCD monitor and risk of electronic shock, do not permeate the LCD monitor with water or any drink. When this happens, turn off the power, unplug the power cord and send the LCD monitor to your local dealer or our service cen-ter as soon as possible. Use a regular power specification of DC 12V .
Package This LCD monitor comes with all the items below. Check to make sure your unit complete. Contact your dealer immediately if anything is missing.
Function Descriptions * Power: You may also turn on or off the monitor by this "Power" button. * Menu: By pressing "MENU" button to pop up the OSD menus. When in sub-menu, press "MENU" again to exit the OSD menus * +/- Keys: 1. Press the "+/-" key to increase or decrease volume. 2. Make item selection in OSD menus to increase or decrease parameters as well. * Mute: Press the "Mute" button from the remote control to still the sound of the LCD monitor.
Setting Up The Dome Lamps *Operating the dome Lamps 1. There are three function buttons for the Dome lamps operation: OFF, DOOR, and ON. (Refer to the following figure) A. OFF: To turn off the lamps. B. DOOR: To make the lamps turned on only when car doors are opened. C. ON: To turn on the lamps.
Installation your Monitor Take care to select a suitable fitting location and securing method for the monitor: *The unit should not distract or obstruct the driver. *The installation should not inhibit the entry to, or the exit from the vehicle. *The unit should not interfere with other vehicle components e,g (sliding sunroof). *Make sure the unit is installed to a secure, robust mounting location and cannot become dislodged in the event of an emergency stop.
Operating the Monitor * Powering up the monitor The monitor will be automatically turned on when releasing the monitor from the base unit and "OFF" when it is closed. Operating Instructions Opening the Monitor 1. Press the monitor release button to lower the LCD screen. 2. Lower the monitor until is fixed 90 from the monitor base unit for viewing (Refer to the following figure.) Closing Monitor 1. Return the monitor to the central viewing position. (Refer to the following figure) 2.
* OSD Menus in A/V Source A. Source Selection Menu SOURCE MAIN MENU AUTO DETECT CUBS.1 = VTSC H. SYNC = +15.7K Hz V. SYNC = +60.0Hz 1 VIDEO 1 VIDEO 2 BRIGHTNESS CONTRAST COLOR HUE SOURCE AUDIO RECALL RETURN B. Audio Input Selection Menu AUDIO EXIT MUTE VOLUME RECALL RETURN * Quick Adjustment OSD Menus 1. By pressing "MENU" button, you may open the MAIN MENU, using "+" or "-" together to pick out OSD functions. 2.
Remote Control TV/AV TV/CATV TV/CATV interchange TV/AV MUTE POWER Power MUTE 1 2 3 4 5 6 7 8 9 0 FM/AM Channels convertible(CH) Number Pad SETUP SETUP Monitor UP + VOL FUNC Monitor CH DN Volume control buttons - MODE Appendix Changing the New Battery in Remote Control 1. Push the cassette button to wards the right. (As shown # 1 in below figure) 2. Pull the all battery cassette away from the remote control. As shown # 2 in below figure) Change a new battery.
Specifications 1. Type 15" Roof Mount Color Display Monitor 2. Signal Input Sync. : Separate TTL sync. Video : Composite sync. System : NTSC, PAL, SECAM Audio : 1.0Vp-p 3. Display System 4.
