Introduction Thank you for purchasing this Pyle Pro PAHT Tweeter System. The loudspeaker is designed to provide you years of high performance in any application that you require. Please read this manual carefully to fully maximize the performance of the speaker. Maintenance and Safety • Do not expose the speaker to moisture. • Avoid hot and cold temperature extremes. • Clean using a damp cloth. Make sure that no moisture contacts the drivers. You can use a hand vacuum to clean the carpet.
Connections The PAHT speakers have “Quick Connect” speaker terminals, which accommodate wire leads. Make certain that the wires you are using are at least 14 gauge unshielded speaker cable (the lower the number, the thicker the wire). Do not use shielded “instrument” cables. Amplifier Requirements Check the product specifications (page 4) to see the power handling for your model. There are a couple of considerations to keep in mind when choosing an amplifier to drive your PAHT series speaker.
Troubleshooting No Sound: Check connections Try a different speaker cable Check levels on amplifier Confirm amplifier is getting a signal (check signal LED, or use headphone output) Intermittent Output: Check connections Try a different speaker cable Distorted Sound: Check if the amplifier is overdriven. If it is, you will have to turn the level down. Make sure you are not exceeding the RMS rating of your speaker. Specifications Ω ! " ! # (# &' ( )* &' 8 : 8# -/* &' 1 -/* (# +" & ( ' ,-.
Parallel Setup Crossover Setup 5
Recommended Accessories $ !"# $ % & ()* * ()* !"# + % ' ()* * & ,# Check out these and other accessories at www.pyleaudio.