PCA3 2X75 Watt Stereo Power Amplifier www.pyleaudio.
Your New Pyle Pro Amplifier gives you the power and versatility you need in a professional sound system. The amplifier's wide frequency response makes it suitable for amplifying music or vocal program material. PCA3 can compatible with walkman and computerize devices (MP3) via 3.5mm to RCA converter. Please read this manual thoroughly before you attempt to set up and use the amplifier. It contains a range of installation suggestions as well as instructions to ensure safe usage.
Features and controls • 7 PWl.!'iIDOlIII __ _ 1. Power ON LED Indicator -Lights to indicate power is turned on. 2. Blue LED Output Level Display 3. Treble Tone Control - Lets you boost or attenuate treble, for the desired sound. 4. Bass Tone Control - Lets you boost or attenuate bass, for the desired sound. 5. Master Volume Control -Lets you adjust the overall sound level. 6. RCA L/R LINE Input -Lets you to connect the desired LINE input source. 7.
CARING FOR YOUR PYLE PRO AMPLIFIER Your Pyle Pro Amplifier is an example of superior design and craftsmanship. The following suggestions will help you care for your amplifier so you can enjoy years of use: *Keep the amplifier dry. If it gets wet, wipe immediately. *Use the amplifier only in well-ventilated installations. *Handle the amplifier away from dust and dirt. *Wipe occasionally with a damp cloth to keep it looking new.
Connecting two 4-8 ohm speakers in stereo mode. Connecting four 8 ohm speakers in stereo mode. Ya.ToOQE FUIE @� El ' @ TROUBLE SHOOTING No power The fuse might be blown. Check the amplifier's fuse and replace it if necessary. No sound Sound source or speakers Check all connections. not connected properly. MASTER volume control set Adjust the volume control to minimum. to desired setting. The speaker's wire might be Make the wrong impedance.
Limited warranty All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for one (1) year from the date of purchase. This warranty is limited to the original retail purchaser of the amplifier. Should the unitfa II due to factory defects in material or workmanship,your unit well be repaired or replaced at the sole discretion of PYLE.
