PDWM1800 Premier Series Professional UHF Wireless Handheld Microphone System
FOREWORD RECEIVER FEATURES Please read this manual before using this equipment in order to avoid damage through incorrect operation and to get the best performance from your purchase. Please keep and store this instruction booklet in a safe place after reading it for future reference. This professional wireless microphone system operates on high-efficiency, low-consumption discharging techniques.
MICROPHONE TRANSMITTER FEATURES SYSTEM CONNECTION 1. Receiver Power Connection: Connect the DC connector of supplied AC/DC adapter into the DC power input of receiver. Plug the AC input connector into an AC 120/60Hz or AC 220V/50Hz outlet. (Shown as below) 2. Antenna: Keep the position of antenna at a 45 angle from vertical. 1. Grille: Protects the cartridge and helps to reduce the breath sounds and wind noise. 2. Battery Cover: Open to install the battery. 3.
TROUBLESHOOTING PROBLEM PDWM1800 INDICATOR STATUS SOLUTION No sound Red transmitter indicator is not flashing Slide transmitter POWER ON/OFF switch to ON position. Make sure battery is inserted property, observing battery (+/-). Be sure to replace the battery with a fresh one.
