User Manual

Matching Receiver and Transmitter (Only apply to some models)
1. Make sure the receiver is powered OFF.
2. On transmitter side, press and hold the frequency- change button, then press
and hold the power button till the display is flashing.
3. Turn ON the receiver and then you will see the RF light is flashing.
4. Attention: For the receiver that has LED display, turn ON the receiver and
wait for 3-5 seconds
5. Get back to the transmitter side and re-press the frequency-change button.
6. Matching is successful if the RF light is ON or the LED display shows frequency,
otherwise, re-do step 1 to step 5.
www.PyleUSA.com
6
www.PyleUSA.com
7
BODYPACK TRANSMITTER CONNECTION
1. Lavalier Microphone Connection:
Connect the connector of supplied lavalier microphone to the connecting jack
of transmitter (Shown as below). Set the transmitter work state in wireless
lavalier system.
2. Headset Microphone Connection:
Connect the connectorof supplied headset microphone to the connecting
jack of transmitter (Shown as below). Set the transmitter work state in wireless
headset system.
8 8 8 8
VOL-A
AF AF
POWER
RF RF
VOL-B
Wa it fo r 4~5 s e c onds
VOL-A
AF AF
POWER
RF RF
VOL-B
POWE R OFF
8 8 8 8
Flashing
Frequence
change button
a
b
c
8 8 8 8
O K
VOL-A
AF AF
POWER
RF RF
VOL-B
P O W E R ON
Flashing
a
b
1
2 3
4
Press and hold
Press and hold
5
6
A B
A B