User Manual

www.PyleUSA.com

Matching Receiver and Transmitter (Only apply to some models)

1. Make sure the receiver is powered OFF.

2. On transmitter side, press and hold the frequency- change button, then press

and hold the power button till the display is ﬂashing.

3. Turn ON the receiver and then you will see the RF light is ﬂashing.

4. Attention: For the receiver that has LED display, turn ON the receiver and

wait for 3-5 seconds

5. Get back to the transmitter side and re-press the frequency-change button.

6. Matching is successful if the RF light is ON or the LED display shows frequency,

otherwise, re-do step 1 to step 5.

Body Pack Transmitter (Only apply to some models)

Functions

1. Clip microphone socket

2. LED Iight

3. Antenna

4. LED display

5. Frequency-change button

6. Power switch

Frequency-change button