User Manual
www.PyleUSA.com
5
BODYPACK TRANSMITTER CONNECTION
1. Lavalier Microphone Connection: Connect the connector of supplied Lavalier
microphone to the connecting jack of transmitter (Shown as below) Set the
transmitter work state in wireless lavaliere system.
2. Headset Microphone Connection: Connect the connector of supplied Headset
microphone to the connecting jack of transmitter (Shown as below) Set the
transmitter work state in wireless headset system.
TRANSMITTER BATTERY INSTALLATION
1. Battery Installation of Transmitter: Push open the battery cover. Insert the
supplied batteries into battery jar in polarity and cover the battery Cover.
MATCHINGWIRELESS FREQUENCY (RECEIVER /TRANSMITTER CONNECTION)
1. Press and hold the “SET” button on the receiver --- then release the button once
the receiver display begins to ash.
2. When it is ashing, continue to press the “SET” button again to select the desired
channel, the selected channel will save automatically without any action for 5
seconds.
3. Power on your microphone/transmitter, press and hold the “UP” and “DOWN”
arrow keys once the CH number on display begins to ash.
4. When it is ashing, press “UP” and “DOWN” arrow keys to select the same channel
as chosen on receiver, then, the selected channel will save automatically without
any action for5 seconds.
5. Repeat steps 1-4 to connect an additional microphone / transmitter (For models
PDWM3375, PDWM3400)