User's Manual
www.PyleUSA.com www.PyleUSA.com
BODYPACK TRANSMITTER CONNECTION
1. Lavalier Microphone Connection: Connect the connector of supplied
lavalier microphone to the connecting jack of transmitter (shown as below)
Set the transmitter work state in wireless lavalier system (L).
2. Headset Microphone Connection: Connect the connector of supplied
headset microphone to the connecting jack of transmitter (shown as below)
Set the transmitter work state in wireless headset system (H).
7 8
SYSTEM CONNECTION
1. Receiver Power Connection: Connect the DC connector of supplied AC/DC
adapter Into the DC power input of receiver. Plug the AC Input connecter
into an AC120/60Hz or AC220V/50Hz outlet. (Shown as below)
2. Antenna: Keep the position of antenna at a 45 angle from vertical.
(Shown as below)
3. Audio Connection: Connect the corresponding output of receiver by
supplied 1/4w phone jack audio cable or your XLR cable to the Input of
power amplier, mixer.