IMPORTANT: Pack carefully in original package if possible. We are not responsible for damage incurred in returning items for repair. A letter stating your exact street address, daytime phone number, and the problem you are experiencing should be included. You must also enclose a copy of original receipt as proof of date of purchase. PDWMB400 ~~PYLF Brooklyn, NY 11204 1-800-444-5671 Monday Through Thursday.gAM to 5PM Friday gAM to 1 PM Eastern.
Some common problems and their solutions are printed below. Thanks for purchasing our wireless meeting microphone. Please read these instructions carefully so that you fully understand how to operate this microphone. Store these instructions in a safe place for future reference. - Uses VHF 170-270 MHZ frequency to avoid interference. - Uses multilevel high frequency and midfrequency narrowband filters to avoid interference. - Quartz crystal oscillating circuits guarantee a steady frequency.
1. Please take note of the following workflow diagram for reference on connecting this machine. 2. Make sure your system is set to the correct power (110 V). Then set the volume of your sound equipment. 3. Adjust the mix so that the users of MIC 1 and MIC 2 sound good together. 4. Unplug the machine if you will not be using it for a long time. - Keep the machine at least 3 feet above the ground and 3 feet away from walls. - Pull the antenna upright.
I Front Panel I IHandheld Transmitter ~ o tj; o 0 t} o 0 (0) o o (0) 0 0 (0) o 0 (0) o 0 (0) 0 T T T T T T T I 1 2 3333333 I.Powerswilch 3.Volume adjust I Back Panel o 4 >20mW Antenna Hide inside Pre-weight 50 uS Cartridge Moving dynamic coil Battery consumption <30mA Battery life 8 H time of duration Temperature range -10 --55 i 2.Power indicator 4.Receiving indicator Body pack transmitter ~ I o AN'r.D 99 4 1. Antenna 3 Radio output power 2.3 2.
The light on the microphone indicates that the battery has power and that the microphone is functioning.