Safety Precautions CALCULI Installation Installation Method -« Structural Diagram -~ Input Terminals Remote Control ««peeress s s nee Panel Keys Turn O/Off Focus/Keystone Adjustment 12 Menu Setting Regular Setting Software Update Troubleshooting Customer need to keep this warranty card. Thank you for purchasing fhe projector.
Accessory List Projector e 1pc Remote Control 1pe Power Cable AV Signal Cable VGA Signal Cable Accessories which may be purchased separately: 1. Projection Screen 2. Spare Lamp 3. Ceiling Mount 20 ‘Warning: Please write down the model number MODEL NUMBER: and serial number of this product in the box on the right. SERIAL NUMBER: ‘Warning: Do not look directly into the light of the lens this could cause damage to your eyes.
caution Please read this manual carefully prior to operating this projector and save for future reference. Please follow instructions when operating and/or repairing the projector. 1. Cleaning Instructions Use a wet cloth with no detergents to wipe the projector. Remember to unplug the power cable first. 2. Accessories To avoid damage, use only the recommended accessories. 3. Wet Surfaces Do not place the projector on any wet surfaces. 4. Installation Please install this projector ona stable surface. 5.
opting Problem Possible Causes 1. The indicator light i doss not work when © Power cable is not connected properly. the power switch is I turned on. © The power switch is faulty. 2. The projector does not come on when using the remote control. © The power switch is turned off. @ The remote control has no batteries or the ‘batteries are low. © The remote control is not being aimed at the IR receiver. 3. No image. © The input source may not be correct. © No input signal. © The input cable is not connected.
@ s Spe @ Avoid direct sunlight to obtain best quality image. Curtains should be closed if using the projector during the day. 8. Channel Menu and updating. Y | Software Update (USB) | Channel Menu and Updating Software Update (USB) | Update the martyrdom throng USB.
In Standard Setting (Front Projection) Please refer to the following table to adjust your picture size and distance (from the lens to the screen). Picture Size Distance 43 16:9 50" 1.78m 1.38m 70" 2.37m 1.95m 100" 3.35m 2.83m It links to the USB source and is used to read files like photo/music/movie/text. 120" 3.97m 3.42m (Suggest that does not overseer inch for a better viewing .} 7. Multimedia Menu Please allow +-3% to the image sizes in the table above.
on Installation Method 4. Time Menu Contact a professional installer to mount this projector to a ceiling. Follow the instructions below for the correct projector positions. screen ; Projectors Pearlie% E screen @ Front projection @ Rear projection ceiling mount ceiling mount Clock —— Off Time screen projector. projector serene, On Time m M; Sleep Timer 01710 min/20 min/30 min/60 doubt min/120 min/180 min/240 min Autocross common @ Front projection @ Rear projection table mount table mount . 5.
ins 2. Picture Menu Picture Menu Pierrot Mode | Standard/Mild/User/Dynanic e Color Temperature | Cool/Medinm/Warm/User L4 | Aspect Ratio 4:3 or 1/Zoom [Noise Reduction | OfLow/Middle/High PC Setup sett o, Surat Sopped? 'HDMI Mode PC/DVD User Mode of Picture M Contrast 0-100 | Adjust the difference between the darkness and the brightness. o Brightness 0-100 | Adjust the brightness of the full picture. Color 0100 | Adjust the color of the picture.
Men Interface 1. Menu Setting Method 1) Whilst operating the projector, press the menu key the projector will show an I an image as depicted in picture 1. S 2) Press key, to enter the following sub menus: picture > sound > time > option > applications > channel. Name Instruction 3) After entering the selected submerse, use R Y/Pb/Pr Component video input “A /W™ to schlock the specific from you AV Video input want to adjust per picture 2.
just me ‘When operating the projector for the first time, the image may appear unclear or trapezoid. Please follow the following steps for correction: Focus adjustment ‘Turn the lens clockwise to the projector, thereafter, slowly turn it counter clockwise. At the same time, check the resolution point. The best position of the lens will be ‘be determined when the image is clear, Please note: when moving the projector from & cold to 8 warm environment, water vapor may scour.
y Instr Panel Key Sketch Map Power Key @ Indicator Light Press the power key to turn on or switch Red: In standby mode off the projector. This function is the same Blue: Working as “power” on the remote control, @ Direction Operation Key @ Source By pressing these keys, preferred menu. Choose the input signal, choices may be made. such ag AV, Ypres, HDMI or PC. (G Menu By pressing this key, you can adjust the menu by using the Up/Down as well as Left/Right buttons. 10 Off the Turning on the projector: 1.