USER’S MANUAL PORTABLE SOUND BOOTH PSIB27
Note: Microphone and tripod are not included in the list of contents. The portable sound booth is used to provide sound protection and to reduce sound reflection. The booth can be open and assembled in a short time. It could be placed on the table. It is suitable for various kind of microphone including vocal microphone, instrument microphone and other recording microphone, etc. Note: Please read this user’s manual carefully before using the sound booth.
4.Put down the flexible board and make it support the back side of the frame. In order to make sure each foam to stay on the inner side well please follow the below steps 5. Take out one of foam and insert it, aligning it with the top surface. 6. take out a second foam and insert it, aligning it with the right side surface.
7. take out the third foam and insert it, aligning it with the left side surface 8.take our the fourth foam and lay it against the back side surface. If you find the top foam can niot stay well,you can use the double side glue sticker to stick the top foam with the top side. 9.Then you can place your microphone with tripod base or round mic base inside ,connect your mic cable with microphone,install your pop filter on the stand then start to record.
PORTABLE SOUND BOOTH FEATURES AND SPECIFICATIONS Features: • Versatile Mic Recording & Sound Isolation Ability • Portable and Compact Cube Design • Ready to Record: Quick & Easy Setup • Soundproofing Studio Foam ‘Wedgie’ Acoustic Tiles • Box-Style Engineered for Maximum Absorption/Isolation • High Density Noise-Absorbing Acoustic Foam • Perfect for Studio Recording, Podcasts, Vocals, Singing, etc.
