PT-659DU DOUBLE CASSETTE DECK TAPE COUNTER DOUBLE CASSETTE DECK PT-659DU PEAK PROGRAM LEVEL METER FULL AUTO STOP SYSTEM HIGH SPEED DUBBING PLAY CrO2 A DUBBING HI-SPEED DUBBING REC CrO2 B REC PLAY PLAY REC LEVEL POWER MIN MAX www.pyleaudio.
OPERATION INSTRUCTION STEREO DOUBLE CASSETTE DECK 1
PRECAUTIONS Thank you for purchasing this product. Taking time to read these operating instructions carefully before use will acquaint you fully with all its features and help ensure Power plug l When disconnecting the power cord from the power optimum performance. outlet, always take hold of the plug, and not the wire, l The safety and operation instructions should be and pull free. l Never connect or disconnect the power plug with wet retained for future reference.
Servicing Do not wipe with thinners Wipe the panels and case from time to time with Refer all servicing to qualified service personnel. soft dry cloth. Using any kind of thinner, alcohol Servicing is required when the apparatus has been or volatile liquid will mar the surface, cause damaged in any way, such as power-supply cord or blotching on the exterior and erase the markings plug is damaged, liquid has been spilled or objects and should therefore be avoided.
PANEL INFORMATION 2 10 4 3 11 12 13 14 5 1. 6 7 8 9 2 15 10 POWER BUTTON Use this button to turn the unit on and off. If the unit is not being used for a prolonged period of time, please also remove the AC plug from the power socket. 2. CASSETTE HOLDER Insert your cassette into either of these two holders. The holders may be opened by pressing the corresponding [STOP/EJECT] button (13). Please note that both decks can be used for playback but only deck B can be used for recording/dubbing.
OPERATING PROCEDURES 2 3 4 POWER CORD Plug this cord into a power socket before powering on the unit. If not using the unit for prolonged periods of time, please remember to turn it off and remove the cord from the socket. 2. USB PORT Use the included USB cable to connect this port to an available USB port on your computer when transferring tapes. 3. GAIN KNOB This knob can be used to adjust the audio signal from the unit to your computer.
RECORDING INSTRUCTIONS Please use deck B for recording external sources or dubbing tapes. RECORDING EXTERNAL SOURCE TO TAPE: 1. Press [STOP/EJECT] on deck B to open the cassette holder. 2. Insert a blank tape and close the cassette holder. 3. If recording to a Cr02 tape, press the [REC Cr02] button. 4. Press the [PAUSE] button and then press [RECORD]. 5. Play your external source and check the levels on the display. Use the REC LEVEL knob to adjust the level of the incoming audio signal. 6.
