User's Manual

13 14 15
16 17 19 20 2118
BACK PANEL
10.BALANCE CONTROL
-lets you adjust the sound balance between the left and right
amplifier output.
11.BASS AND TREBLE TONE CONTROL
-Lets you boost or attenuate bass and treble for the desired
sound.
12.AUX1/AUX2/CD INPUT SELECTOR
-Lets you select the desired input music source.
13.SWITCHABLE MIC PAGER AND MIXING MODES
-Set to PAGER, allows a voice to be heard clearly through the
microphone by attenuating automatically all the audio input
source.This is good to use when paging the person in office,
store, or restaurant.
-Set to MIXING, both of the voices from the microphone and
music will be existed at the same time. It is similar like playing
at KARAOKE events.
BLUETOOTH FUNCTION INSTRUCTION
External devices which have a built‐in Bluetooth feature can be
connected to this amplifier wirelessly to play through the
amplifier’s speakers.
8.MIC VOLUME CONTROL
-Lets you adjust the volume of connected MIC to the proper
setting.
9.Master Volume Control
-Lets you adjust the overall sound level, turn the knob
clockwise to increase the volume.
14. Bluetooth Antenna
15.Fuse
The amplifier uses a fuse for protection against surges
and short circuit. If the amplifier suddenly turn off and
will not turn on, check the fuse. If necessary, replace
it with a 1-amp, 250-volt, fast-acting, 5x20mm fuse
(not supplied)
16.
1/4" MIC INPUT JACK
-Lets you connect a microphone with a 1/4" plug.
17.AUX1/AUX2/CD RCA INPUT
-Lets you connect to most high-level audio sources such as CD
player, tape deck, tuner, camcorder or VCR.
18.REC RCA OUTPUT
-Lets you connect the amplifier to a tape deck for recording.
19.
Push Type Speaker L/R Terminals
Let you easily connect the speakers'wires directly to
the amplifier
20.110V/220V Switch
According to power voltage, push this button to the
correct station of the 110V or 220V.
21.
AC IN Power Cord
-Connect to AC 110V/60Hz or 220V/50Hz
-
-
-
-
Use of antenna is best receiving for Bluetooth signal.