User Manual
The white video input connector from the rearview mirror assembly serves as the Reverse Signal Sense and takes
priorityovertheyellowvideoinputconnector.
Ifyouconnectthecameratothe
yellowvideoinputofthemirrorassembly,therewillbeaconstantpicturedisplayed on
theLCDdisplay.
Ifyouconnectthecameratothe
whitevideoinputofthemirrorassembly,therewillbeapicturedisplayedontheLCD
displayonlywhenthevehicleisplacedinreversegear.
MirrorAssemblyMounting
The rearview mirror assembly mounts over your existing rearview mirror housing.The spring‐type clamp mechanism
easilyfitsoveryourrearviewmirrorandsitsontopofit,withoutcausinganydamage.Usetwohandstofirmlyholdthe
newmirrorassemblyoveryourexistingmirror,withonehandholdingthe
mirror,andtheotherexpandingthespring‐type
clampmechanism.
MirrorAssemblyButtonControls
Locatedinthe backof therearview mirrorassembly arebuttoncontrols.The topand bottombuttons serve assettings
adjustment controls (UP/DOWN), while the centerbutton can be pressed to access settings like: brightness, contrast,
saturation,tint,mode(16:9,4:3),languageandsettingsRESET.
‐Determinethebestlocationforthecamera(Keepinmindthatyou mustrunthecablefromthecameratothetransmitter).Youmay
needtodrillasmallholeinthepanelnearyourlicenseplate(Thecameraispreferablymountedjustabovethelicenseplate).
‐Besure
whenrunningtheconnectioncablestoleaveasmallamountofslacksoyoucanstillmove the camera around thelicense
plate,ifyoudecidetoslightlyadjustthecamera'spositioningatalatertime.
‐ Test the camera, activate your vehicle and see if the system functions. Your connected
monitor will automatically power on if
properlyconnectedtoapowersource.Placingyourvehicleinreverseshouldprovideapicture(ifconnectedthroughthewhitevideo
inputofthemirrorassembly.