PORTABLE GARMENT STEAMER INSTRUCTION MANUAL PSTMIR17
Portable Garment Steamer Thank you for purchasing Steam brush and iron combination. Before using your Steam brush and iron combination, please read the following safety instruction carefully, as they are written to help you get the best performance out of your Steam brush and iron combination and to use it correctly. After reading the instruction, keep them in a safe place for future reference.
Should the care instructions in the clothing item forbid ironing, you may not use the steam brush on it. Should you do so, the clothing item could be permanently damaged. The water tank is to be filled exclusively with mains water (or a mix of distilled and mains water).You will otherwise damage the appliance. You may not clean the appliance with solvents, alcohol or abrasive cleaning agents. These could cause damage to it.
Before the First Usage Remove the steam brush from the packaging. Remove all possible adhesive tags and protective foils from the steam iron. △Attention! ! Plastic bags can be dangerous. To avoid fatalities through suffocation, keep plastic bags out of the reach of children. 1. Put the garment steamer on the support base 2. Open the filler and water in 3. Make the steam button at the turn off position 4. Plug in and the power on the unit 5.
Fabric bristle brush function operation Assemble the Fabric bristle brush with the soleplate, you can dispel the dust on the clothes, sofas, curtains, blankets or other home textiles Attaching operation: Firstly, make the head of the Fabric bristle brush lock to the head of soleplate, then push the back of the fabric bristle brush lock to the soleplate. When the switch is locked is done.
Instruction for use Attach the appropriate accessory for the garment you wish to iron. Fill the appliance with water The temperature will be higher and higher with clockwise rotation Plug in Steam brush and iron combination and check that the power light indicator is illuminated Wait for approximately one minute while the appliance heats up. Press the steam release button.
Cleaning and maintenance When you have finished using the Steam brush and iron combination, make sure that it is completely unplugged from the mains before starting to clean it. Allow the water in the appliance to cool for 15 minutes. Then carefully remove the water- reservoir cap. Turn the appliance upside down to empty out all the water Clean the appliance and accessories only when they have completely cooled. The cleaning brush is ideal for removing any fluff from the accessories.