For the best results and the satisfaction from your new unit, please read this manual thoroughly, and retain it for future reference. ATTENTION To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property. Please follow the points as below. OPERATION AND MAINTENANCE • Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the device, TV, or radio may generate noise.
PRECAUTIONS WHEN USING THE USB 2.0 AND 5V DC TERMINALS Precautions When Using the USB 2.0 and 5V DC Terminals. When connecting the USB 2.0 connector to computer, please must abide following points. If not, it may cause computer crash, breakdown or losing data. If the computer or mixer crash, firstly restart the application software or computer operating system or disconnect the mixer, then power on again. • Use an AB type USB cable. USB 3.0 cable cannot be used.
2 1 23 19 13 3. [LINE IN] Controller, used to adjust the volume from RCA LINE IN input. 4. [CH 1/2/3] Controller, used to 15 adjust the volume of signal input of CH1/2/3. 18 5. [PEAK] LED indicator light, it 16 will light up when the input signal is too high. 12 6. [PHANTOM +48V] Switch, used to activate the phantom power supply on XLR connector, it offers +48V phantom power. 4 5 6 7 10 11 7. [PHANTOM POWER] LED, indicates the phantom power is on. 8.
11. [MAIN] Controller, used to adjust the volume of MAIN and USB PORT output. 12. [CLIP] LED, it will light up when the MAIN output signal is too high. 13. [POWER ON] LED, it will light up when the mixer’s power is on. 14. [PHONES] 3.5mm output jack, connect with earphones, it is supporting stereo phone plug. 15. [PHONES] 6.35mm output jack, connect with earphones, it is supporting stereo phone plug. 16. [PHONES] Controller, control the volume of earphones. 17. [AUX IN] 3.
CONTROLS AND FUNCTIONS for PAD33MXUBT - PAD43MXUBT 3 1 5 7 6 2 4 8 14 9 15 19 11 20 22 23 13 17 12 24 16 18 10 1. [MIC/LINE] Input jack, used to connect the mono signal such as XLR microphone or 1/4” line input device. 2. [+48V PHANTOM POWER] Button/LED, when the button is turned on, the LED light is on, provide DC +48V phantom power to XLR plug on MIC mono input. Please turn on this button when using the condenser microphone which is powered by a phantom power. 3.
9. [GAIN] Controller, determines the basic volume of CH1/2, adjust it for maximum volume performance, when the volume gets too loud, the PEAK LED indicator will keep flashing. 10. [HIGH & LOW] Tone controller, adjust the high frequency and low frequency for CH1/2. 11. [PAN] Controller, this is the panorama control or balanced control, determines the position of channel signal within the stereo image.
Set this controller in middle position, signal level of channel L & R will be same. When the controller is set to top stop, only Channel L receives the signal, and not Channel R, vice versa. 12. [CH1/2] Controller, used to adjust the volume of signal input from CH1/2. 13. [PEAK] LED indicator light, it will light up when the input signal is too high. 14. [ECHO EFFECT] Controller, to adjust the Echo effect. 15. [AUX IN] 3.
USB 2.0 Terminal Use a USB 2.0 cable (included with this package) to connect the Local unit’s USB Port to a USB port on the computer. When connected to a computer, it supplies power to the mixer, and audio data can be sent between mixer and computer. It can also be used with a USB power socket or USB power bank to supply power to the mixer. When using as external power supply, it must meet the following requirements: • Output voltage: 4.8V to 5.2V • Output current: 0.
PAD12MXUBT 2-Channel Wireless BT Streaming Mini Audio Mixer Compact DJ Mixer with USB Audio Interface (+48V DC Phantom Power) FEATURES: • Ultra-low Noise Design with High Headroom • USB Sound Card/Audio Interface, for Computer Playing & Recording • Combo Jack (XLR+6.35mm) for MIC/LINE/GUITAR Inputs • RCA Jacks for Stereo Input and Output • 3.
PAD22MXUBT 2-Channel Wireless BT Streaming Mini Audio Mixer Compact DJ Mixer with USB Audio Interface (+48V DC Phantom Power) FEATURES: • Ultra-low Noise Design with High Headroom • USB Sound Card/Audio Interface, for Computer Playing & Recording • Combo Jack (XLR+6.35mm) for MIC/LINE/GUITAR Inputs • Independent 3.5mm Stereo Input Jack • Flexible Connectivity for a Variety of External Devices • 6.35mm Jacks for Stereo Input and Output • 6.
PAD33MXUBT 3-Channel Wireless BT Streaming Mini Audio Mixer 1 Mono + 2 Stereo (Line In & 2-TK) Inputs, Compact DJ Mixer with USB Audio Interface (+48V DC Phantom Power) FEATURES: • Ultra-low Noise Design with High Headroom • USB Sound Card/Audio Interface, for Computer Playing & Recording • Built-in Echo Effect • Extremely Musical 2-band EQ & PAN on each Channel • Combo Jack (XLR+6.35mm) for MIC/LINE Inputs • Independent 3.
PAD43MXUBT 4-Channel Wireless BT Streaming Mini Audio Mixer 2 Mono + 2 Stereo (Line In & 2-TK) Inputs, Compact DJ Mixer with USB Audio Interface (+48V DC Phantom Power) FEATURES: • Ultra-low Noise Design with High Headroom • USB Sound Card/Audio Interface, for Computer Playing & Recording • Built-in Echo Effect • Extremely Musical 2-band EQ & PAN on Each Channel • Combo Jacks (XLR+6.35mm) for MIC/LINE Inputs • Independent 3.
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
