PROFESSIONAL DIGITAL ALTIMETER ----ALL·in-0NE (E lt - Art No.
FEATURES BATTERY INSTALLATION Altimeter - Altitude Range (-500 to 9000 meter 1-1 600 to 29500 feet), Resolution of 1 meter 1 1 feet - Max.' Min. memory for Alt itude - Altitude History and Graphical display of the last 12 hour altitude read ings - Alt itude Alarm - Stop Watch up to 9 hr 59 min 59.
m ENTER DIFFERENT MODE Icons: tBlI - Altimeter mode Gain/loss Ilr:tm - Barometer mode . MAX - Maximum memory ... - Ascending - Descending • Elm mb ft : : } Barometer Un" D2 _:-_.:-_:.-_:_:-. J- :- :- :- .:-..: - "- "- "- "- "- ( 1: - :~: - :- : ., ... _ ..... ... -1. !Itt m Ii D4 ) TEMP - T.m~atur. ~ - Alarm ON/OFf 1 0 !IIIIIII1I1I/1II/'!11 D5 < - Barometer Graphic Display } Altimeter Unit BAROMETER NORMAL MODE . IIAX m -....... ...
- CALENDER L Press button C to calenda r mode, press and hold until 04 (Year) flashing, change to the desired year by press button B. 2 Continuing to set the Month and Date by button Band button C. 3. Theday of week will automatically calculated and shown up. WAKE UP AND SET YOUR COMPUTER - Press button A until all segment on or re-install the battery Altimeter Unit (Meterl Feet) Selection L Right after all segment on, the Om" digit will start to flicker. 2.
THE BAROMETER • Press Button D to enter the Barometer Mode. 4. According to the barometric change. the pressure trend will indicate the weather is going fine (Fig. 1 UP). stable ( Fig. 2 Stable) a and nd going worse ( Fig. 3 Down ). There are fIVe different states: Sunny. Slightly Cloudy, Cloudy, Rainy and Storm Barometer and Weather States Adjustment 1. To adjust the barometer and weather states. weather forecast function can have a good Initialization. 2.
THE BAROMETER THE ALTIMETER Maximum and Minimum • Press Button A to enter the Altimeter mode. 1. Press Button 0 to enter the Memory mode. 2. The memory of maximum and minimum barometer will be scrolled on the display automatically. 3. To reset the memory, press and hold Button B. At the same time, the memory for the hygrometer and the thermometer will be reset also. 4. Press Button 0 to quit or left It return automatically to Normal Mode after 30 seconds. _EIOIII'IIAX r11D '~.6: L-......:..=-..:.....
Maximum and Minimum The Total Altitude Displacement , I , 1. Press Button A to enter the Memory mode. 2. The memory of maximum and minimum altitude will be scrolled on the display automatically. 3. To reset the memory. press and hold Button B. At the same time. the memory for the hygrometer and the thermometer wi ll be reset also. 4. Press Button A to quit or left it return automatically to Normal Mode after 30 seconds. n 01 The Altimeter Bar Chart 1. Press Button A to enter the Bar Chart Mode. 2.
THE HYGROMETER The Altimeter Alarm 1. Press Button A to enter the Altimeter Alarm Mode. 2. To set the target altitude for the Alarm, press and hold Button A until the digit starts to flicker. 3. Press Button B to set the digits and then press Button A to conflrm. 4. Repeat Step 3 to set your desire digits. 5. After setting the target altitude, press Button B to activate or deactivate the alarm. 6. For the Altimeter Alarm sound, it will . Beep..Beep ..
