User Guide

FEATURES AND CONTROLS
1. Power On/Off with indicator inside
Main power switch, it will light when the amplifier is turned on.
2. Speaker A/B Channel Input Selectors with indicator inside
Lets you select speakers you want to use with the amplifier in channel A or Channel B.
3. Balance Control
Lets you adjust the volume of the left and right outputs.
4. Volume Control
Lets you control the total of output power level.
5. BT/LINE Input Switch (For PAMP2000BT only)
Press in, it’s Bluetooth Input status, and press it out, it’s LINE input status.
6. Bluetooth Antenna
(For PAMP2000BT only)
The antenna is best receiving for Bluetooth signal.
7. Line 1 Input
It acts as a “Priority” input over Line 2 and is used to connect to a local audio source such as
TV Audio, CD Player, Computer Sound Card or other line level sources via RCA jacks. The
Line 1 input will override Line 2 input whenever the signal from Line 1 is activated.
8. Line 2 Input
It acts as a “Primary” line level input and is used to connect the audio source distributed from
the primary audio system that the user want to have.
9. Line Output
It acts as pass through output, to send the line signal from Line 1 or Line 2 to another ZONE
or location.
10. Stereo/Bridged Mode Selector
Lets you select STEREO input mode to provide 60 watts per channel output, or BRIDGED