Please read all instructions before use for the best performance of this product. Save these instructions for future reference. Box Contents MUTE VOL+ VOLOPT COAX BT USB MOVIE Bookshelf Speaker RCA to RCA audio cable LINE MUSIC DIALOG Remote Control Stereo RCA to 3.5mm audio cable Digital Optical cable Quick Start RCA to RCA audio cable Power Adapter LED Indicators and Button Introduction Infrared receiver LED Indicators Active Speaker 2 www.PyleUSA.
01. Power switch 02. Input selection 01 02 03 07 EQ 08 OPT 04 COAX 09 VOLUME 0 -2 05 R LINE IN -4 +4 -6 TREB 0 -2 06 L +2 +6 +4 -6 BASS 10 USB +2 -4 SPEAKER OUT 11 +6 Model: PBKSRB40 Power Consumption: 60W 12 DC IN 19-21v Active Speaker SPEAKER IN 13 Passive Speaker Press in to navigate between audio sources: BT -> Optical -> Coaxial -> LINE IN -> USB 03. Sound effects Press in to navigate between audio sources: Music -> Dialogue -> Movie 04. Volume control 05.
Connection Diagram TV BT Device d a b BT signal up to 30 feet EQ e OPT COAX VOLUME c -2 0 L +2 R LINE IN -4 +4 -6 -2 TREB 0 +6 USB +2 -4 +4 -6 BASS SPEAKER OUT +6 f Model: PBKSRB40 Power Consumption: 60W DC IN 19-24v Active Speaker SPEAKER IN Passive Speaker USB g a Coaxial cable (not supplied) b Digital Optical cable (supplied) c USB (not supplied) d BT e Stereo RCA to 3.5mm audio cable (supplied) f RCA to RCA audio cable (supplied) 4 www.PyleUSA.
Connecting with a TV Active Speaker C A Optical digital cable (supplied) B RCA to 3.5mm cable (supplied) Coaxial cable (not supplied) TV A Method 1. Connecting using an Optical cable. Select Optical mode and set the TV’s audio output to “PCM”. (More information on PCM page) B Method 2. Connecting using a RCA to 3.5mm cable. Select RCA mode. C Method 3. Connecting using an Coaxial cable. Select Coaxial mode and set the TV’s audio output to “PCM”.
1. Press "Menu" on the TV’s remote control. 2. Press the arrow keys on the remote to scroll to "Audio Settings." 3. Press "OK" on the remote control. 4. Scroll to "Advanced Audio" and press "OK". Some televisions may not have an"Advanced Audio" menu and may list various audio settings instead. 5. Scroll to "Audio Output Mode" or "Digital Audio Output Mode" and press "OK". 6. Scroll until "PCM" is displayed as the current audio output. 7. Press "OK" to save the settings.
Troubleshooting No sound • Check if the power indicator light is ON. • Try to turn up the volume using either the master volume control or remote control. • Ensure the audio cables are firmly connected and the input is set correctly on the speakers. • Check if there is signal output from the audio source. Cannot connect via Wireless BT • Make sure the speaker is switched to BT input, in other audio input mode BT can not be paired or connected.
Questions? Comments? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
