Please read all instructions before use for the best performance of this product. Save these instructions for future reference. Box Contents MUTE VOL+ VOL- TREB+ MUSIC BASS+ MOVIE TREB- BT RCA Bookshelf Speaker DIALOG OPT BASS- USB RESET Remote Control Quick Start RCA to RCA audio cable Stereo RCA to 3.5mm audio cable Digital Optical cable Power Adapter LED Indicators and Button Introduction Active Speaker LED Indicators 2 www.PyleUSA.
01 02 01. Volume control 04 02. Input selection USB OPT 03 L 05 R RCA IN 06 07 DC IN SPK OUT 08 Press in to navigate between audio sources: BT -> Optical -> RCA -> USB 03. Optical input port 04. USB input port Active Speaker 05. RCA input port Product Name: Bookshelf Speaker Model: PBKST33 Input Voltage: 19-22V 06. Power port Power Consumption: 50W 07. Left speaker audio output SPK IN 09 08. Power switch 09.
Connection Diagram TV BT Device a b c BT signal up to 30 feet Product Name: Bookshelf Speaker USB OPT Model: PBKST33 Input Voltage: 19-22V c L Power Consumption: 50W R SPK IN RCA IN DC IN SPK OUT Active Speaker d Passive Speaker e a BT b Digital Optical cable (supplied) c Stereo RCA to 3.5mm audio cable (supplied) d RCA to RCA audio cable (supplied) 4 www.PyleUSA.
Connecting with a TV Active Speaker A Optical digital cable (supplied) B RCA to 3.5mm audio cable (supplied) TV A Method 1. Connecting using an Optical cable. Select Optical mode and set the TV’s audio output to “PCM”. (More information on PCM page) B Method 2. Connecting using a RCA to 3.5mm audio cable. Select RCA mode. Setting “PCM” on your TV When all cables are connected properly, and LED indicator lights properly, if there is no sound from tv or Soundbar, please set your tv as below: www.
1. Press "Menu" on the TV’s remote control. 2. Press the arrow keys on the remote to scroll to "Audio Settings." 3. Press "OK" on the remote control. 4. Scroll to "Advanced Audio" and press "OK". Some televisions may not have an"Advanced Audio" menu and may list various audio settings instead. 5. Scroll to "Audio Output Mode" or "Digital Audio Output Mode" and press "OK". 6. Scroll until "PCM" is displayed as the current audio output. 7. Press "OK" to save the settings.
Troubleshooting No sound • Check if the power indicator light is ON. • Try to turn up the volume using either the master volume control or remote control. • Ensure the audio cables are firmly connected and the input is set correctly on the speakers. • Check if there is signal output from the audio source. Cannot connect via Wireless BT • Make sure the speaker is switched to BT input, in other audio input mode BT can not be paired or connected.
Questions? Comments? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
