User manual

www.PyleUSA.com
3
Getting Started
Charge the battery
Before using the speaker, you must fully charge the battery. When the
battery is charging, the BATTERY INDICATOR lights solidly. After the battery
has fully charged, the light switches o.
1. Connect the AC adapter to the DC IN JACK of the speaker rmly, and plug
it into a wall outlet.
2. When the battery is fully charged, rst disconnect the AC adapter from
the speaker, then from the wall outlet.
Power Source
1. Press the POWER SWITCH to turn ON the speaker.
2. Press the POWER SWITCH again to turn OFF the speaker, and pull the AC
adapter out of the wall outlet to switch o completely.
Bluetooth Function
Pair the bluetooth device
Before using your speaker with a Bluetooth device for the rst time, you
must pair and connect it to the Bluetooth device.
Press the POWER SWITCH to turn on the speaker. The display shows "HI".
Then press the MODE button to select the Bluetooth mode (F1).
The "BLUETOOTH INDICATOR" starts to ash, and the speaker is now in
pairing mode.
Pair the speaker using NFC
1. With Near Field Communication (NFC), you can easily pair and connect
the speaker to an Android device with NFC.
2. If the Android device supports NFC, activate its NFC feature, and touch
the NFC area of the speaker with the NFC area of your Android device
(F2).The speaker pairs and connects to the Android device automatically.
For details on NFC, see the user guide of the Android device.
3. For oth•er Bluetooth device, pair the speaker manually.