me PYLE PyleUSA.
Please read this instruction manual before using the unit. Please keep it for future reference. Brief introduction Please read this manual in detail before use in order to operate and use it correctly and bring the superior performance of the product into full play.
Mode and Connection instruction Wireless BY Switch mode 1. Tum on the Switch console click the System Settings Menu Button on the Main Page interface and click the Airplane Mode option on the next level option menu, and then click the Controller Connection (BT) to turn ON the Wireless 87 function. System Selectness Sane eae Ally Lie Sheet tiptoeing 2.
2. Press and hold the ¥ Button and then press the HOME Button for 2 seconds or press and hold the Pairing Button for 3 seconds to enter the Wireless BY search mode LED 1 LED A running lamp Ashed, After successful connection, the Switch automatically distributes controller channel and the corresponding channel indicator light will always be asynchronous state or the Switch is pairing connection with controller LED 1 LED 4 running lamp flashing.
2.4G D-INPUT Mode: Press 7 + HOME button for 2 seconds to enter 2.46 search mode, LED 2.4 LED 3 flash when paling, LED 2 + LED 3 light will be on alter connection successively. 2.46 XANADU Mode: Press “4” + HOME button for 2 seconds to enter 246 search mode, LED 1 + LED 4 flash when paling, LED | + LED 4 light will be on after connection successfully 2.406 Android Mode: Press" + HOME button for J seconds to enter 2.
in Wireless BY mode, press the HOME button for § seconds to shut down the controller and disconnect from the Switch. Short press the Pairing button could to shut down the controller directly short press the HOME button for Second to tum on and wake up the controller: Low Voltage Alarm When the battery of the controller is lower than 3 55V20 IV.
SWITCH Motor Vibration Strength Adjustment Rags and hold the L+ ZLB ZR button for 3 seconds for adjustment, there are 3 levels of strength, 259-509 100% Default to 50% strength, After setting, the corresponding level lamp is always on for 1 second, and the motor vibrates for 1 second. Six Faisal Sensor Adjustment Press the "B+ "4 HOME button for power on, two sets of lights flash each other press again #" button for adjustment.
FCC Warning Statement Changes or modifications nol expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the Limits fora Class B digital device, pursuant lo Part 150i the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation.
