User Manual

ManualsBrandsPyle ManualsElectronicsUniversal Folding TV Ceiling Mount - Hide-Away Ceiling Flip Down Tv Mount Bracket - VESA Mount Compatible for 17” - 37" TVs - Flat Panel HDTV, LCD Screen, LED, Plasma, & Smart TVs - PyleHome

INSTALLATION MANUAL

Folding LCD Ceiling Mount

PCMTV25

ISSUED: MAR. 2014

CAUTION: DO NOT EXCEED

RATED LISTED WEIGHT. SERIOUS

INJURY OR PROPERTY DAMAGE

MAY OCCUR!

20kg

(44lbs)

RATED

20kg

(44lbs)

RATED

37"

MAX

75x75

100x100

200x100

200x200

7. Adjustment

Maintenance

• Check that the bracket is secure and safe to use at regular intervals(at least every three months).

• Please contact your distributor if you have any questions.

0°/-90°

For saving the space, you can fold the display by pushing the display back until it fits in place.

Adjust to the desired position.

www.pyleaudio.com

Summary of content (6 pages)

PAGE 1
INSTALLATION MANUAL Folding LCD Ceiling Mount 7. Adjustment R 0°/-90° www.pyleaudio.com Adjust to the desired position. CAUTION: DO NOT EXCEED RATED LISTED WEIGHT. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! For saving the space, you can fold the display by pushing the display back until it fits in place. Maintenance • Check that the bracket is secure and safe to use at regular intervals(at least every three months). • Please contact your distributor if you have any questions.
PAGE 2
NOTE: Read the entire instruction manual before you start installation and assembly. Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement. WARNING • Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet.
PAGE 3
1. Separating the VESA Plate 3a. For Wooden Ceiling Mounting 55mm (2.2") ((2.2”) 2.2") ø 4.5mm (ø 3/16”) Loosen 1 mark the exact location of mounting holes. B Use a proper Allen key to loosen the screws in order to separate the VESA plate from the ceiling mount. 2 2. Opening the Mount Drill pilot holes Press Screw the screws into the ceiling Tighten the screw leaving a 4mm space to ceiling. Open the mount for installing.Press the ceiling plate down,then lift it up till fully open.
PAGE 4
3b. For Solid Brick and Concrete Mounting 60mm ((2.4") 2.4") Align the both holes of ceiling plate to the screws in ceiling and move the ceiling plate until the both screws are seated in upper area of tear-drop mounting holes. ø 10mm (ø 3/8") 1 Mark the exact location of mounting holes 2 W-C Drill pilot holes W-A Fix the ceiling plate using the two other screws and then tighten all screws. WARNING • Installers are responsible to provide hardware for other types of mounting situations.
PAGE 5
4. Installing the VESA Plate Align the both holes of ceiling plate to the screws in ceiling and move the ceiling plate until the both screws are seated in upper area of tear-drop mounting holes. Top of the display TV TV TV TV M-E M-F M-A M-B M-C M-D W-C W-A or M-F M-G M-D M-G M-F M-D M-G Fix the ceiling plate using the two other screws and then tighten all screws.
PAGE 6
5. Hooking the Display onto the Ceiling Mount 6. Adjustment Remove the decorative covers for adjusting tension. C It is necessary that slightly loosen or tighten adjustment screws to adjust tension using a proper Allen key. Height adjustable Hang the display with the VESA plate onto the ceiling mount. B B Install the screws to fix the ceiling mount and VESA plate together tightly. Loosen screws(but not remove) and adjust the display to desired height as needed, then tighten screws.