PCO885 19'' Rack Mount Power Conditioner 3600 Watt Power Conditioner w/ 20 Outlets
This unit was developed using the expertise of professional sound engineers and working musicians. You will find your new unit has superior performance and greater flexibility than any other power conditioner in its price range. READ THIS MANUAL CAREFULLY TO GET THE MOST OUT OF YOUR NEW UNIT. Features For advanced RF/EMI noise filtering and the quietest operation of your equipment..
IMPORTANT SAFETY INSTRUCTIONS WARNING! When using electric products, basic precautions should always be followed, including the following: 1. Read all the instruction before using the product. 2. DO NOT use this product near water (e.g. near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool etc.). 3. This product should be used only with a cart or stand that will keep it level and stable and prevent wobbling. 4.
FRONT & BACK PANEL FEATURES: 2 4 3 7 6 1 5 1. POWER SWITCH: Outlet switch activates protection and filtration to all outlets. To turn the unit ON or OFF, press the upper or lower portion of this button. 2. Voltage LED Digital Screen 3. Dual USB Charge (5V/2A): Charge for Mobile-phone 4. 4 FRONT PANEL OUTLETS 5. 16 REAR PANEL OUTLETS: EMI/RFI Filtered, spike/surge protected and switched. 6. CIRCUIT BREAKER: Resettable 15 Amp thermal circuit breaker. 7.
. MAXIMUM LOAD: The Power Conditioners 4 Front and16 Rear Panel Outlets are rated at 15 amps total load (or 3600W at 120VAC). If this maximum load is exceeded, the Circuit Breaker will trip, cutting off power to all connected equipment in your rack. If this happens, reduce the load by unplugging one or more units from the power conditioner, and push the circuit breaker to reset it.
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
