Instructions / Assembly

9
HOW TO OPERATE THE POWER BANK
How to charge your power bank
How to charge your digital device
with this power bank
How to supply power to
your 12V DC products
 Use original charger with input AC
100-240V output 16.8V 1A
 Connect the original charger to the
power bank and home power
source.
 Recommended charging time 3H
 After fully charged, all LED turn
to solid light.
 Connect your digital device with the
original cable to the USB port.
 Press on/off button to start charging.
 The power indicator will light up for
proper charging.
 After it is fully charged, remove the
cable and the LED will automatically
turn off in 10 seconds.
 Plug your 12V DC products
with original power cord
into the female cigarette
lighter port.
Fuel Gauge Indicator:
4 LED: 75%-100% Capacity
3 LED: 50%-75% Capacity
2 LED: 25%-50% Capacity
1 LED: 7%-25% Capacity
All LED out: 0-7% Capacity
ON / OFF BUTTON
 Press the button once to
charge the digital device.
 Press the button twice to
access the emergency light
 Press and hold for 3 seconds
to access illumination, in the
same way to turn it off.
Charge you power
bank with the
included charger.
USB OUTPUT
5V/2.0A
Cigarette lighter output
15V to suppler power for
your 12V DC products.
Plug the spigot into the female
cigarette lighter port to prevent
water from going inside and to
carry it with a string/rope.