Instructions / Assembly

HOW TO DETACH THE PUMP SET

HOW TO USE THE PUMP ALONE

Rotate the draw bar

and lock panel upward

90 degrees.

Pull the latch upward to

unlock with one hand, hold

the torch and pull the pump

set upward to detach it

from the water tank with

the other hand.

Press the release button down

with one hand, hold the torch

and pull it outward from the

pump set with the other hand.

Open the plug cover, insert 12V power cord, and attach the suction hose and outlet hose to the pump set.

NOTE: The suction hose is not included in the package; the max length of the suction hose can be used up to 5-6

meters.

Make sure the power cord, suction

hose and outlet hose is firmly

connected. Put the suction hose

into your own water container,

and start spraying.