Instructions / Assembly
8 
 OPERATING THE SPRAY GUN           
(1) Intermittence flow 
The intermittence flow will occur when you pull and release the trigger repeatedly. 
(2) Continuos flow 
         Position 1     Position 2 
Water will continuously flow when pull the trigger forward at position 1 or position 2. 
(3) Variable Spray gun 
AUTOMATIC SHUTOFF 
THE AUTOMATIC SHUTOFF FEATURE: 
When the trigger is released, the dynamic pressure shuts the motor off automatically. When the trigger is pressed, the 
pressure  drop  will  automatically  activate  the  motor.  To  ensure  correct  automatic  shutoff  operation,  the  time  interval 
between trigger release and engagement must not be less than 5-10 seconds. 
  Pull the trigger on the spray gun and adjust water as needed. 
SHUTTING DOWN YOUR PORTABLE WASHER: 
1.  Place the switch in the OFF position. 
2.  Pull trigger on spray nozzle to relieve any leftover water pressure in the hose or spray nozzle. 
3.  Disconnect the hose from unit. 
4.  Disconnect the nozzle from hose. 
5.  Press the spray nozzle to remove excess water. 
Twist down the nozzle head, connect the shower head / brush to the spray gun when needed. 










