~~PYLE® PRe) 1000/3000 WATTS AM/FM Receiver With Built-in DVD/MP3/USB PD-1000A/PD-3000A www.pyleaudio.
TABLE OF CONTENTS BEFORE USE Safety Precautions ....................................... 01 Safety Precautions ....................................... 02 Important Safety Instructions ....................... 03 Notice And Disc Protection ........................... 04 Playable Discs And Accessories ···················05 CONTROL AND CONNECTION PROGRAM .......................................................... 14 TITlEIPBC ........................................................... 14 LANGUAGE .............
SAFETY PRECAUTIONS The lightning flash with arrowhead symbol,within an equilateral triangle,is intended to alert the user to the presence of uninsulated"dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
SAFETY PRECAUTIONS This product incorporates copyright protection technology that is protected by method claims of certain U. S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation . Reverse engineering or disassembly is prohibited .
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing .
NOTICES and DISC PROTECTION ON HANDLING DISCS NOTES ON HANDLING • The top and rear panels ofthe unit may become warm after a long period of use. This is nota malfunction . • When the unit is not use, be sure to remove the disc and turn off the power. • If you do not use the unit for a long period, the unit may not function properly in the future. Turn on and use the unit occasionally. • Do not place foreign objects on the tray. • • Do nottouch the playback side ofthe disc.
PLAYABLE DISCS and ACCESSORIES The following discs can be played: DISCS LABEL CONTENTS DISCS LABEL CONTENTS OVOVIOEO ~ Audio +Video (moving picture) CO-R ~ Audio or Video rn Audio +Video (moving picture) CO-RW Audio +Video (moving picture) JPEG ~ Video(picture) Audio MP3 HP3 Audio VIDEO SUPER VCO (SVCO) Video-C~ (VCO) ·s~ fi ~co VIDEO 0 AUOIOCO OllTAlAUDI • Audio or Video • Discs than those listed above can not be played.
FRONT PANEL and LED FUNCTION -0 0- 0 -0 0--4-0 0--10-0 0-0<18-0 L + • MENU , 6 • • • •••• • INPUT 0-+4 AMlFM L -_ _ _~ R o 00000.0.0.6.6. 1, LIGHT Signal intensity light indicate 2, MEMORY After a station has been found, you can store the station by pressing the MEMERY button, and the screen will display MEM above a channel number, then you can press the number knob. to save the station, when the channel number dIsplay to move from right to left, it means the station has been saved.
REAR PANEL FUNCTION 1!.1§. 1Q.111.£ II I O[FM<:5ANTENNA<:5AM~io I .A'.
REMOTE DEVICE FUNCTION 21.Number button 22.Time select button button 23.Menu button 24.PBC MENE button ELECT button Remote Control Operation 1. Remote control should be 0 perated within 6 meter and the scope of30 in front of receiver. 2. Make sure that there is no big obstacle between remote control and machme. 3. Remote sensor should be far away from the light,high amounts oflight can affect its performance.
REAR PANEL CONNECTION • Connecting to amplifier ENQINEERED IN JAPAN DE81QNED IN THE USA CE ~ COOLING FAN PowerAmp .......• ~ 2 Mono Sub Outputs AlLeft AlRIght B/Rlght B/Left © © ~~ PowerAmp ® ® Main Speakers Preamp Out SAFETY INSTRUCTIONS 1. Make sure that all connections are properly connected and the main volume is set to minimum level before turning on the unit. 2.
BASIC CONNECTION • Connecting to a TV with AudioNideo cable Television D To vtdeolaudlo Input To S-video Input • If the TV has an S-video input, connect the DVD player with an S-video cable. When using an S-video cable, do not connect the yellow video cable. Note: The volume adjusting here only works when it's connected to a power amplifier. While it's connected to TV set without speakers, the volume can not be adjusted on this device. You can only adjust the volume on the TV set.
BASIC PLAYBACK Preparations • When you want to view a disc, turn on the TV and select the video input connected to the unit. Basic playback 1. Press POWER switch in the front panel to ON, the unit turns on and the TV screen will display the start logo. If a disc is already in the tray, it will begin to play once the power is on . 2. Press OPEN/CLOSE ~ to open the disc tray, place a disc on the disc tray. • There are two different disc sizes. Place the disc in the correct guide on the disc tray.
LISTEN TO RADIO, LINE INPUT OPERATION ADVANCED PLAYBACK eMP3, AUXEXTERNALCONNECTION OF AUDIO SIGNAL INPUT PresslNPUT key on the remote control or on the machine panel, then the machine can be Inputted external connection of MP3/AUX and AM/FM audio signal, the display shows the status. Audio signal of any equipment can be connected.
ADVANCED PLAYBACK USB READER FUNCTION • The machine will play them the same as disks when there is only a single form of playable file in the USB disk or in the triple card . • MP3 and WMA forms files have the priority cover others to be played after the machine has scanned if the USB disk contains several forms of playable files. USB/DVD When the device is playing DVD, you can press [USB/DVD] key, then the screen will displays READ USB after pressing [ENTER] key you can turn to USB status.
ADVANCED PLAYBACK IMPORTANT NOTE: THE FOLLOWING FUNCTION DESCRIPTIONS ARE FOR DVDS OPERATION AND DISPLAY ON SCREEN MAY BE DIFFERENT FOR OTHER DISC FORMATS . TIME Once the TI M E button is press, the screen will display messages.Use the LEFT/RIGHT cursor button to select your preference.Press ENTER! PLAY to confirm . Pressing this button will display "DVD n XXlXX CH XXlXX(!) 00:00:05 (chapter elapsed) ", " 1/3 ENG 1X15.
SPECIAL FUNCTION PLAYBACK JPEG DISC PLAYBACK When playing JPEG disc, a navigation menu will be displayed automatically if the disc is loaded in succession . In the menu, use UP or DOWN cursor button to select a file, then press "ENTER/PLAY" to be played as a slideshow. Press PREY or NEXT to select the previous or the next picture. Press PAUSE to pause the current picture for viewing, press ENTER/PLAY, to return to normal playing.
SPECIAL FUNCTION PLAYBACK Kodak Picture CD Playback Playback (Normal) When a Kodak Picture CD is inserted into the unit, an automatic slide show is launched . Each picture in the Kodak Picture CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole TV screen. some slide-show transition modes are provided, use "PROG" key to select. Customer can set transition effects for each picture. To display an image indefinitely, press the "PAUSE" key.
SYSTEM SETUP • When you press SETUP button on the remote control, the setup menu will be displayed. It will include "SYSTEM SETUP", "LANGUAGE SETUP" , " AUDIO SETUP" , "VIDEO SETUP': "SPEAKER SETUP" , "DIGITAL SETUP". 1. Within the setup menu, you can use UP, DOWN, LEFT and RIGHT buttons on the remote control to move the cursor, and then press the ENTER/PLAY button to make your selection . Press LEFT to return to the previous menu . 2.
SYSTEM SETUP 1.7 NEXT PAGE NE XT PAGE:Select sub-item of NE XT PAGE and press ENTER key to setup. ELE CT LOGO E SUM ~ 1.7-5 EXIT SETUP EXI S ETU E 2. LANGUAUAGE SETUP 1.7-1 DEFAULT DEFAULT: Resets to all the manufacturer's original settings for this DVD player Press ENTER/PLAY to perform the reset. ~ DEFAUL STORE 1.7-2 SELECT LOGO EXIT SETUP 2.1 OSD LANGUAGE On Screen Display (OS D) Language: Users can select the whole setup menu and on-screen display language. OSD LANGUAGE II ~ ENGI.
SYSTEM SETUP 2.4 MENU LANG 4. VIDEO SETUP PAGE MENU LANG: Sets the preferred menu language as the default when playing DVD.(lf DVD support these languages) ....----------J ~ ,;.;~:;.:~~:;::N~:;:~;.---I. MENU LANG JAPAN 4.1 BRIGHTNESS 2.5 EXIT SETUP BRIGHTNESS: Sets the brightness level of video output. EXITSETUF' ~B= ~G =~ == E~ =-~' ~ rr=====~ 3. AUDIO SETUP PAGE _ lTI =lE - - - - ~ ~ 6 4 2 o AUDIO OUT KEY EXIT SETUP 4.2 CONTRAST CONTRAST: Sets the contrast level of Video output. 3.
SYSTEM SETUP 4.4 SATURATION 6. DIGITAL SETUP PAGE SATURATION: sets the saturation of the video. SATURATION _ ~ 12 10 8 6 4 02 EXlTSETUP 6.1 OP MODE 5. SPEAKER SETUP OP MODE: This can set the type of output and adjust audio frequency. Of'MODE EXlTSETUP 6.2 DYNAMIC RANGE 5.1 SPEAKER SETUP PAGE DOWN MIX MODE: sets front speakers to LT/RT STEREO, V SURR • The first 3 settings (LT/RT, STEREO, V SURR) downmix the sound Signal for 2-Speakers.
SYSTEM SETUP 6.3 DUAL MONO DUAL MONO: If your amplifier/decoder has Dolby Digital output, you may select stereo, left mono, right mono, or mixed mono mode for your amplifier decoder. DUAL MONO 7. SOURCE SOURCE: This system will automatically read the USB if there is no playble dics loaded. Use the Source menu to select to read from either disc and USB directory.
TROUBLESHOOTING Before calling for service, you can perfonn the checks described in the troubleshooting guide for immediate solutions.
SPECIAL FUNCTION OF DVD SETTING THE TV SCREEN SIZE Multi-aspect ratio suit to different TV screen size. Picture format on Disc TV Screen Size 4:3 16:9 Pan Scan Letter-box Wide Screen Functions supported by DVD discs There are many functions available on DVD discs and the functions vary per player and per manufacturer.
SPECIFICATIONS System and Outputs VF Signal system NTSC/PAL Frequency response CD: 20Hz-20KHz(EIAJ) OVO: 20Hz-44KHz(96KHz)(Sample result) 20Hz-22KHz(48KHz)(Sample result) Audio SIN ratio > 90 dB Audio output (analog audio) Electric level output: 1.8V±0.2 resistance: 10KS Electric level output: 1.0Vp--p±0.
SPECIFICATIONS Amplifier Technical Specifications Technical PD-1000A PD-3000A MainChannelPowerOutput 1000WX2 3000WX2 <1% <1% 80hm 80hm 400mV/33kOhm 400mV/33kOhm 15mV/6000hm 15mV/6000hm SignaltoNoiseRatioPureAmplifier 76dB 76dB SignaltoNoiseRatio KARAOKE 71dB 71dB FrequencyRange (FrequencyResponse40Hz-15KHz) ± 2dB ± 2dB FrequencyRange (ToneCharacteristic1 OOHz-1 OKHz) ± 14dB ± 14dB Weight 7.
PyleAudio.com 718.535.1800 718.236.
