PD1000BA - PD3000BA Home Theater Wireless BT Streaming Preamplifier Receiver Wireless BT Streaming Home Theater Preamplifier Receiver Audio/Video System CD/DVD Player AM/FM Radio, MP3/USB Reader
TABLE OF CONTENTS BEFORE USE Safety Precautions - - - - - - - - - - - - - - - - - - - - - - - - - Important Safety Instructions - - - - - - - - Notice and Disc Protection - - - - - - - - - - - - Playable Discs and Accessories - - - - - - - - PROGRAM - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20 TITLE/PBC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20 LANGUAGE - - - - - - - - - - - - - - - - - - - - - - - - -
SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constirute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
SAFETY PRECAUTIONS This product incorporates copyright protection technology that is protected by Macrovision method claims of certain U. S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
3. Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers ) that produce heat. 4. Water and Moisture Do not use this product near water for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 5. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning. 7.
13. Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions.
LOCATION Do not locate the unit in places such as: • Near heating devices orin enclosed car. • High temperature (47°C/116.6°F or higher) or high humidity (90% or higher). • Dirty places. • Avoid direct exposure to sunlight DISTURBANCE • When you place this unit near a TV, radio or VCR the playback picture may become poor and the sound may be distorted. In this case, place the unit away from the TV, radio orVCR.
ON CLEANING DISCS • Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean. • If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth. • Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray for vinyl Lps. It may damage the disc.
PLAYABLE DISCS AND ACCESSORIES The following discs can be played: • Discs than those listed above cannot be played. • Non-standardized discs, even if they may be labeled as above cannot be played. • The performance of a recorded disc depends on the method and quality of disc burning. In some cases, the disc may not be played.
FRONT PANEL AND LED FUNCTION 1. LIGHT: Light indicates signal intensity 2. MEMORY: After a station has been found, you can store the station by pressing the MEMORY button, and the screen will displays MEM above a channel number, then you can press the number knob to save the station, when the channel number displayis moving from right to left, it means the station has been saved. 3. ST/MONO: Stereo and Mono selector. 4. INPUT: This is used to select the input sources DVD/CD/USB, TUNER, IPOD/MP3 AUX 5.
15. FWD.FF: It is quick to enterlfonivard search the set 16. PREV, SKPR: Top a songltop a set 17. STOP: Stop control 18. NEXT, SKPF: Next song/next set 19. PRESS SWITCH: Press to switch the power unit ON or OFF 20. IPOD/MP3 JACKS: IPOD/MP3 connect to these jacks 21. HEADPHONE JACKS: Headphone connect to these jacks 22. MIC INPUT JACKS 1&2: KARAOKE Mic connect to thesejacks 23. ECHO CONTROL: Turn the knob to adjust the MIC echo level 24. MIC TREBLE: Adjusts the treble of Mic 25.
1. TUNER ANT: Connect for AM and FM antennas. 2. A SPEAKER OUTPUT TERMINALS: Connect your speaker system to these terminals. 3. B SPEAKER OUTPUT TERMINALS: Connect your other speaker system(s) to these terminals. 4. COOLING FAN 5.6. R/L OUTPUT 7.9. DIGITALAUDIO OUTPUT: One coaxial one optical, this output can connect to the amplifier with dolby digital or DTS decoder to play the movie with correspondent records. 8.10.11.12.13.
EJECT Open/Close Button POWER STANDBY Button Number Button A/B SPEAKERS OUTPUT SELECT Button MUTE Button VIDEO Mode Button PAL/NTSC Switch Button MENU Button TIME Select Button UP/DOWN/RIGHT Play/Enter Button Channel L/R Button SETUP Button PBC MENU Button PREV/CH- Button VOLUME+ Button DISPLAY Button NEXT/CH+ Button Volume- Button STOP Button PLAY/PAUSE Button Frequency DOWN Button Frequency UP Button USB/DVD PROGRAM Button LANGUAGE Button USB/DVD Button MEMORY Button Subtitle Button TI
REAR PANEL CONNECTION Connecting to Amplifier SAFETY INSTRUCTIONS 1. Make sure that all connections are properly connected and the main volume is set to minimum level before turning ON the unit. 2. When more then one pair of speakers are used, (specially the main speaker output) make sure that the speakers used have the same wattage and impedance, otherwise the unit maybe damaged under high power or long term operation. 3.
BASIC CONNECTION Connecting to a TV with Audio/Video cable • If the TV has an S-video input, connect the DVD player with an S-video cable. When using an S-video cable, do not connect the yellow video cable. Note: The volume adjusting only works when it's connected to a power amplifier. While it's connected to TV set without speakers, the volume cannot be adjusted on this device. You can only adjust the volume on the TV set. Connecting to an Audio System 14 www.PyleUSA.
Connecting to an Amplifier Equipment BASIC PLAYBACK Preparations • When you want to view a disc, turn on the TV and select the video input connected to the unit Basic Playback 1. Press POWER switch in the front panel to ON, the unit turns on and the TV screen will display the start logo. If a disc is already in the tray, it will begin to play once the power is ON. 2. Press OPEN/CLOSE to open the disc tray, place a disc on the disc tray. • There are two different disc sizes.
Pause/Step Playback 1. Press PAUSE/STEP first time to pause play back (still mode). The sound will be muted during still mode. 2. Press STEP continuous to single step forward to the next frame in the video. 3. Press PLAY to resume normal playback. Previous and Next While playing, press PREV key to play back previous chapter. Press until you reach the first chapter. Each press of NEXT key while playing will skip the current chapter and play the next one. Fast Forward and Fast Reverse 1.
LISTEN TO RADIO, LINE INPUT OPERATION ADVANCED PLAYBACK • MP3, AUX EXTERNAL CONNECTION OF AUDIO SIGNAL INPUT Press INPUT key on the remote control or on the unit’s panel. The unit can input MP3/AUX and AM/FM external connection audio signal, the display shows the status. Audio signal of any equipment can be connected. • INPUT TRANSFER TO MP3, AUX Press INPUT key on the remote control or on the unit’s panel.
NOTES: The machine will store the radio station into current channel number when the machine receives one. The effect is much related to the intensity of the signal. If there are no signal or immethodical signal, you'd better choose manual scan or frequency selection scan. • FREQUENCY SELECTION SCAN Press [TIME] key on the remote control, the display shows the status. Then you can input the frequency of the radio station you want to listen to. A. FM frequency range: 87.5-108.0MHz B.
• AUTO STORE RADIO STATIONS After starting AUTO SCAN function, the machine will store the radio stations received into ordinal channels.The current frequency will be stored into current channel number automatically. • MANUAL STORE RADIO STATIONS Press [ /FRE] or [ /FRE+] key to select the radio station you want to listen to, then press [MEMORY] key to store the current radio station into the channel number you want until the signal intensity is strong enough.
ADVANCED PLAYBACK IMPORTANT NOTE: THE FOLLOWING FUNCTION DESCRIPTIONS ARE FOR DVDS OPERATION AND DISPLAY ON SCREEN MAY BE DIFFERENT FOR OTHER DISC FORMATS. TIME Once the TIME button is pressed, the screen will display massages. Use the LEFT/ RIGHT cursor button to select your preference. Press ENTER/PLAY to confirm. OSD Pressing this button will display "DVD TT XX/XX CH XX/XX 00:00:05 (chapter elapsed)," 1/3 ENG 5.
LANGUAGE Press this button on remote control to change the mode of audio. For example: [1 XX 5.1CH], "XX" indicates the language of country. (the number of language depends on disc). VIDEO In play or stop status press VIDEO key on the remote control, the device will switch its video-output Intarface:TV-RGB, P-SCAN, S-VIDEO, INTERLACE YUV. P/N Press the key to switch between NTSC, PAL and AUTO REPEAT Press once to repeating CHAPTER. Press twice to repeat TITLE. Press thrice to repeat ALL.
SPECIAL FUNCTION PLAYBACK JPEG DISC PLAYBACK When playing JPEG disc, a navigation menu will be displayed automatically if the disc is loaded in succession. In the menu, use UP or DOWN cursor button to select a file, then press "ENTER/PLAY" to be played as a slideshow. Press PREV or NEXT to select the previous or the next picture. Press PAUSE to pause the current picture for viewing, press ENTER/PLAY, to return to normal playing.
By MPEG-4 technology, we can encode and compress a DVD film into one or two CD-R disc with pretty good picture quality, or can burn several films that has same quality as VCD into one CD-R disc, or burn several films that has similar quality to DVD into DVD-ROM disc. Note: 1. The MPEG-4 discs available in the market now have many different formats, such as Xvid, AVI, RM etc. But some discs with "MPEG-4" logo in market are not encoded by MPEG technology.
ZOOM The "ZOOM" key is used to turn on or off this function. When this mode is on, any picture will be displayed at the last ratio selected by the user. A message on the screen will Indicate the current zoom ratio. If zoom mode is on, "ZOOM" key are used to control the ratio of zoom in/out. With ZOOM mode off, a picture is scaled to fit the whole TV screen. Notes: During zoom function, slide-show transition and image rotation are disabled.
SYSTEM SETUP • When you press SETUP button on the remote control, the setup menu will be displayed. It will include “SYSTEM SETUP”, “LANGUAGE SETUP”, “AUDIO SETUP”, “VIDEO SETUP”, “SPEAKER SETUP”, 'DIGITAL SETUP". 1. Within the setup menu, you can use UP, DOWN, LEFT and RIGHT buttons on the remote control to move the cursor, and then press ENTER/PLAY button to make your selection. Press LEFT to return to the previous menu. 2. To exit setup menu, you can select the exit setup menu or press SETUP button. 1.
Note: How to Sat the TV Type? • You may switch the NTSC/PAL setting of the DVD player to match the video signal of your TV. • The table below shows what kinds of disc are compatible with each setting (AUTO, PAL and NTSC) 1.3 VIDEO VIDEO: Sets the video output. 1.4 TV DIDPLAYTYPE The TV TYPE will select the different ratio of display TV screen format. There are various types of display on screen for different matches between Disc and TV (Please see Multi-image ratio mode page).
SYSTEM SETUP 1.5 PASSWORD CHANGE PASSWORD CHANGE: You can change the password, please type 4 numerals as new password. The initial password is 0000. 1.6 RATING RATING: The rating control function works in conjunction with the different censorship classes assigned to DVDs. These classes help to control the types of DVDs that the family watches. There are up to 8 censorship classes for DVDs. 1.
2. LANGUAGE SETUP PAGE 2.1 OSD LANGUAGE On Screan Display (OSD) Language: Users can select the whole setup menu and on-screen display language. 2.2 AUDIO LANG AUDIO: Sets the prafenrad audio language as the default when playing DVD. (If DVD support these languages) 2.3 SUBTITLE LANG SUBTITLE: Sets the preferred subtitle language as the default when playing DVD. (If DVD supports these languages) 28 www.PyleUSA.
SYSTEM SETUP 2.4 MENU LANG MENU LANG: Sets the preferred menu language as the default when playing DVD. (If DVD supports these languages) 4. VIDEO SETUP PAGE 4.1 BRIGHTNESS BRIGHTNESS: Sets the brightness level of video output. 3. AUDIO SETUP PAGE 4.2 CONTRAST CONTRAST: Sets the contrast level of Video output. 3.1 AUDIO OUTPUT AUDIO OUT: Sets the audio outputs. 3.2 KEY KEY :Use the Up and Down arrow button to move the scroll and adjust the key. 4.3 HUE HUE: Sets the hue value of the Video. 29 www.
SYSTEM SETUP 4.4 SATURATION SATURATION: Sets the saturation of the video. 5.1 SPEAKER SETUP PAGE DOWNMIX MODE: Sets front speakers to LT/RT STEREO, V SURR or 5.1CH. • The first 3 settings (LT/RT. STEREO, V SURR) downmix the sound Signal for 2-Speakers. This setting allows you to enjoy a surround sound effect with only two speakers. For this reason a setup for additional speakers (described in the following sections) is disabled when DOWNMIX MODE is set to these settings.
SYSTEM SETUP 6.2 DYNAMIC RANGE DYNAMIC RANGE: When LINE OUT is selected, choose this setting to adjust the line out ratio and get different effect. If adjusting to FULL, the audio signal peak value will be the minimum; while adjusting to OFF, maximum. 6.3 DUAL MONO DUAL MONO: If your amplifier/decoder has Dolby Digital output, you may select stereo, left mono, right mono, or mixed mono mode for your amplifier decoder. 31 www.PyleUSA.
TROUBLESHOOTING Before calling for service, you can perform the checks described in the troubleshooting guide for immediate solutions. The unit doesn’t turn ON 32 www.PyleUSA.
DVD SPECIAL FUNCTION SETTING THE TV SCREEN SIZE Multi-aspect ratio suit to different TV screen size. Functions Supported by DVD discs There are many functions available on DVD discs and the functions vary per player and per manufacturer 33 www.PyleUSA.
SPECIFICATION PD1000BA - PD3000BA Home Theater Wireless BT Streaming Preamplifier Receiver Wireless BT Streaming Home Theater Preamplifier Receiver Audio/Video System CD/DVD Player AM/FM Radio, MP3/USB Reader MODEL PD1000BA PD3000BA 1000 Watt 3000 Watt 200 Watts x 2 @ 8 Ohm 360 Watts x 2 @ 4 Ohm 450 Watts x 2 @ 2 Ohm 300 Watts x 2 @ 8 Ohm 550 Watts x 2 @ 4 Ohm 800 Watts x 2 @ 2 Ohm USB Flash Drive Reader MP3 Digital Audio File Compatibility MAX Output Power Features: • Audio + Video Home Theater Sys
• Front Panel Control Center • Output dB (Decibel) Level LED Display • Mic Echo Treble Bass Volume Subwoofer Controls • Built-in Ventilation Cooling Fan • Rack Mountable System Bluetooth Connectivity: • Built-in Bluetooth for Wireless Music Streaming • Works with All of Your Favorite Devices (iPhone, Android, Smartphone, iPad, Tablet, Computer, etc.) • Bluetooth Wireless Network Name: PYLE • Bluetooth Version: 3.0 • Bluetooth Wireless Range: Up to 35’ ft.
