PDA69BU Stereo Amplifier Audio Receiver Sound System with Wireless BT Streaming, MP3/USB/SD/AUX/FM Radio
WARNING! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN. The lighting flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of “DANGEROUS” voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
14. Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers, brackets and associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce the strength of the installation, placement or array. Any such condition severely reduces the safety of the installation and should be immediately corrected.
3. STEPS FOR FM RADIO CONTROL A. Connect the FM antenna before using the FM radio. B. Press MODE button on the front panel or remote control to select FM mode. C. Press PLAY/PAUSE button on the front panel or remote control, and will auto scan and sore FM Radio station from 87.5Mhz to 108Mhz. D. Press NEXT/PREV button to select the FM station. 4.
6. USB PORT The USB port is only used for playing audio files on your USB flash drive. DO NOT use it for power supply as it may damage the unit. 7. CONTROL PANEL BUTTON A. These buttons are only used to control the USB/SD, Wireless BT and FM functions and doesn't control other functions. B. MODE BUTTON: Press this button to select one from USB/SD mode, FM mode or Wireless BT play mode. USB/SD mode will be set automatically after turning ON the unit.
FRONT & BACK PANEL 1. USB/SD Card/Wireless BT Control Console After inserting a USB flash drive/SD Card into the input port, be sure to set the input selector (14) to USB/SD, then press the mode button to choose between audio from the USB port, SD Card input, Wireless BT or FM radio. If you want to use the Wireless BT, check the below steps. STEPS FOR CONNECTING WITH WIRELESS BT DEVICE A. Press MODE button or Press BT button and enter into Wireless BT mode. B.
NOTE: The USB input is ONLY meant to connect to a USB dash drive (thumb drive). Connecting a MP3 player or computer directly to the USB flash drive input will result the unit failing to play audio from those devices. 2. USB/SD Card Control Console Display Screen 1. MODE: The display will show "USB" when set to USB mode, "SD" when set to SD card mode,"BLUE" when set to Wireless BT mode, "87.5 - 108" when set to FM mode. 2. BT: Wireless BT direct selection mode key. 3.
3. Track/ Folder Searching Knob • Turn this knob clockwise to search through all of the tracks inside the USB flash drive/SD Card. Each track will appear by the number of the track. It will show the tracks or folders chronologically (from when the files were loaded onto the USB flash drive/SD Card. Press the knob to begin playing the desired track. First the tracks on the root file will be displayed and then the tracks that are in folders. • Press this knob to activate the folder searching function.
REMOTE CONTROL 1. Press this button to turn ON or OFF USB/SD/FM/BT. 2. When in the FM mode, press this two buttons to select FM station. 3. Press these two buttons to select the previous or next track in USB, SD or Wireless BT mode, to select previous or next station in FM model. 4. Volume up or down for USB/SD/BT/FM. 5. Press the numbers to select the tracks directly. The unit takes 1-2 seconds to response in USB or SD mode. 6. Press this button to repeat mode. 7.
Features: • HIFI 2.0 Channel Audio Amp Design • Wireless BT Audio Streaming Ability • USB Flash & SD Memory Card Readers • FM Radio with Big LED Display • Aux (3.
Wireless BT Streaming Connectivity: • Built-in Wireless Music Streaming Receiver • Compatible with All of Your Favorite Wireless BT Devices (iPhone, Androids, Smartphones, iPad, Tablets, etc.) • Wireless BT Version: 5.0 • Wireless Range: 45’+ ft. Technical Specs: • RMS Power Output: 300 Watt x 2 @ 8 Ohm • Construction Material: Metal, Aluminum Alloy Panel • Frequency response: 20-20KHz, +/-2dB • S/N Ratio: >85dB • T.H.D.: <1.
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
