User Guide

3. STEPS FOR FM RADIO CONTROL

A. Connect the FM antenna before using the FM radio.

B. Press MODE button on the front panel or remote control to select FM mode.

C. Press PLAY/PAUSE button on the front panel or remote control, and will auto

scan and sore FM Radio station from 87.5Mhz to 108Mhz.

D. Press NEXT/PREV button to select the FM station.

4. REMOTE CONTROL

Remote control gives you commanding access only to USB/SD, Wireless BT and

FM functions and not the Master volume, microphone, bass, treble and other

functions.

A. Please take out the battery sheet before using the remote control, otherwise the

remote control will not work.

B. Press these two buttons to select the previous or next track in USB/SD or

Wireless BT mode, there is no response in the FM mode.

C. Press this two buttons to select previous or next channel in FM mode,

there is no response in the USB/SD and BT mode.

D. Press these two buttons to increase or decrease Wireless BT volume,

USB/SD and FM. This buttons doesn’t control the master volume.

E. Press this button to auto scan all frequencies from 87.5MHz to 108MHz, the

unit will auto store the channels in FM mode. Please see 4, C for other details.

F. Press this button to select one from play mode (USB/SD mode, FM mode and

Wireless BT mode). Turning ON the unit will set the USB/SD mode automatically.

MP3 ﬁles will be played automatically after inserting USB ﬂash drive or SD card.

You cannot select the AUX, CD and DVD input with this button.

G. Press and hold this button for 5 seconds to turn ON or OFF the USB/SD,

Wireless BT and FM mode but not to power ON/OFF the unit. The unit will output

the signal in CD, DVD, AUX input mode if you turn OFF the USB/SD, Wireless BT

and FM.

H. Aim the remote controller at the receiver of the main unit.

5. FILE FORMAT

Only MP3 and WAV format are supported for USB/SD stored ﬁles.

The unit may skip the unsupported track ﬁles in USB or SD cards.