User Guide
www.PyleUSA.com
8
3. Track/ Folder Searching Knob
• Turn this knob clockwise to search through all of the tracks inside the USB ash
drive/SD Card. Each track will appear by the number of the track. It will show the
tracks or folders chronologically (from when the files were loaded onto the USB
flash drive/SD Card. Press the knob to begin playing the desired track. First the
tracks on the root file will be displayed and then the tracks that are in folders.
• Press this knob to activate the folder searching function. Once pressed the word
“FOO1” wiII begin show on the display screen. Then, turn this knob clockwise to
search the folders inside the USB flash drive/SD Card. Press the knob to begin
playing the tracks from that folder.
1. SD Card Reader/USB Port: for using external media on this device, just plug your
SD/USB into these ports.
2. LED Screen: all information regarding external media or this device will be
displayed from this screen.
3. Folder and track selection
4. Master Volume Knob: adjust the master volume.
5. Power Switch: Press this Switch to turn the unit on and off.
6. MICROPHONE INPUTS: KARAOKE or EXTERNAL MIC connect to these.
7. Microphone Volume Control Knob: Turn this knob to adjust the microphone
volume level.
8. Microphone Delay time Control Knob: Turn this knob to adjust the microphone
delay time.
9. Microphone Reverb Depth Control Knob: Turn this knob to adjust the micro-
phone Reverb Depth.
10. Bass Control: Turn this knob to adjust the low frequencies of L CH and R CH.
11. Treble Control: Turn this knob to adjust the high frequencies of L CH and R CH.
12. Balance: Control the volume balance from left Chanel to right Chanel.
13. Headphone Output Jack: Connect the Headphone.
14. Input Selector: Turn this button to choose the favorable input.
15. IPOD/MP3 JACK-IPOD/MP3 connects to this jack.
16. AUDIO INPUT: Connect the audio output jacks of DVD/CD to these jacks.
17. LINE OUTPUT: Connect the RECORD input jacks to these jacks.
18. FM ANTENNA CONNECTOR: Connect for AM and FM antennas.
19. SPEAKER OUTPUT: Connect your speaker system to these terminals.
20. BT ANTENNA: Pease pull the antenna out when using Wireless BT input
21. POWER SUPPLY: Connect to AC 115V/60Hz and 230V/50Hz outlet.
22. POWER VOLTAGE SELECTOR: 115V/230V.










