PDICBT57- Dual 5.25" Speakers PDICBT67- Dual 6.5" Speakers PDICBT87- Dual 8.
REAR SPEAKERS 5-6FT WALL WALL WALL WALL IN-CEILING Proper placement of the speakers is an important step in obtaining the most realistic soundstage possible. These recommendations are for the optimum placement of the loud speakers. Use these placement recommenda tions as a guide. Slight variations will not diminish your listening pleasure.The front speakers should be placed the same distance from each other as they are from the listening position.
Speaker Power Supply Connection: The active speaker features the power supply for the speaker system. You may choose to use the included power supply adapter to connect directly into the active speaker's power supply input. *Optional power supply connection can be made by directly 'hard-wiring' power supply cables to the speaker's power supply screw terminal post -- as pictured, also located on the active speaker.
Speaker Connection (Active-to-Passive) Create the daisy-chain style speaker connection to allow speaker-tospeaker audio communication output. The included speaker wire is used to connect the active speaker to the passive speaker. Ensure proper speaker connection wiring between the speakers. + - Passive Speaker Active Speaker 4 www.PyleUSA.
Bluetooth Pairing Once the speakers are installed and powered -- search the Bluetooth network name " Pyle Audio USA" on your device. Ensure the Bluetooth Receiver Switch is set to ON position -- as located on the active speaker. If you are prompted for a password, enter '0000' (4 zeroes). Passive Speaker + - Bluetooth Receiver Switch Active Speaker 5 www.PyleUSA.
INSTALLATION TOOLS NEEDED The in-wall/in-ceiling speakers were designed to be easily installed. However,if you are unsure of your ability to properly install these loud speakers please contact your dealer or a qualified installer. Pencil Phillips #2 screwdriver Measuring tape Utility knife Carpenter’s level Awl 1. Cut the drywall Note: Always allow at least one-half inch between a wall stud and the speaker cutout or the locking tabs will not be able to swivel into place. 2.
3. Screw down each of the four Phillips head screws.The locking tabs will swivel into place and secure the unit to the rear surface of the drywall. Put in the strips of adhesive to secure the grill. 4. Replace the metal grill. 5. Complete TROUBLESHOOTING IF THERE IS NO SOUND FROM ANY OF THE SPEAKERS: • Check that receiver/amplifier is on and a source is playing. • Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected.
IF THERE IS LOW (OR NO) BASS OUTPUT: • Make sure the connections to the left and right “speaker Inputs” have the correct polarity (+ and -). • Consider adding a powered subwoofer to your system. • In Dolby Digital or DTS modes, make sure your receiver/processor is corectly configured. When using a subwoofer, make sure the subwoofer output of the receiver/processor has been enabled.
Features: • Includes (2) Speakers (Active + Passive) • Bluetooth Wireless Music Streaming Ability • 2-Way Full Range Stereo Sound • Built-in Digital Sound Amplifier • Mounts Flush to Walls or Ceilings • Screw Terminal Block Speaker Connectors • Ability to Daisy-Chain Speakers for Stereo System Sound • Environmentally Friendly ABS Construction • Perfect for Custom Installations & Applications Bluetooth Connectivity: • Includes Bluetooth Control Receiver • Stream Wireless Audio from Your Connected Device (Sma
