User Guide
www.PyleUSA.com
1
*Each Wireless Microphone System operates within the qualied wireless
operating frequency range listed as: 174-216MHz.*
This microphone system operates on high-eciency, low-consumption
discharging techniques. Performance features include independent
developed mobile frequency compression,expander circuitry, image
frequency limiting circuits, multiple-checked silent and noise-free circuits,
antenna diversity receiving circuit & switch impact noise defeat circuits.
The PDWM2135 - PDWM2140 - PDWM2145 were manufactured to be easy to use
and still give you professional performance quality.
Simple Installation and Operation:
* Please note- select models come equipped with dierent transmitters
and microphones.
• Unscrew the bottom of the microphone (or slide open the battery compartment
tray of the belt-pack transmitter) to install two 'AA' Batteries. Screw the Battery cap
back on.
• Plug your receiving unit into your mixer or amplier with a 1/4" mono microphone
cord.
• Plug the receiving unit into your electrical wall outlet.
• Turn the receiver ON by using the ON/OFF switch located at the front of the unit.
• There is a switch located on each of the two microphones that turns each
microphone ON/OFF & mutes them individually.