Warning This product is designed for an echoic circuit switch the : transformer with last out for a long-time working, so please | | pull out the pin and turn off “power” when you do not use it. Thanks for purchasing this product, pleads read this instruction carefully so that can understand how to operate the product of the style you bought correctly. Please esp this brochure in a safe place carefully after reading as a reference in the sulfurs.
Tailless B Wide frequency response, high S/N ratio. B Resist disturbing strongly, be standing by noises output to zeros B Super silent function, low TH.D. B No hitting when putting on the switch, so can protect the amplifier and speakers. With a com piste working stats and prows level! indicating. # With a wide using range for over 30m in a good surrounding, for 20m in a duplicate one. E Duel channel designed, two microphones can use af the same time to sing without any disturbing caused by.
NAME OF MICROPHONE 1. Grill 2. Low Battery lod Indicator 3. FROSTBITTEN SWITCH 4. Body-phone §. Battery cover Using Guido / instruction ut the receiver near the studied adjuster, connect with power and the signal protected cord with or HX QUT. And then connect with the amplifier of the microphone of the audio adjuster (MIC iN). Draw out twa antennas completely. Put on the prows switch, The power indicator shiner. This receiver ia being dialing by.
When the power pressure is lower than 7V, it may cruse the instability of signal, the shorter effective distance snd the timbre maybe not as good as normal, so peas sangs new battery to avoid theses SAFETY GUIDANCE READING GUIDANCE: You'd batter read the stately and operating guidance before using this product STORING GUIDANCE: Keep this instruction In a safe place In order to use 1 again a3 a reference In the future WARNING: Pay aeration to the waning on operating about this product ABIDING BY THE GUIDANCE
FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radii communications.