manual

2
RECIEVER MIXER AMPLIFIER
KAROKE AMPLIFIER
Installation of reciever
Keep the machine 1m above the ground
Keep the machine away 1m against the wall.
Pull the antenna up rightness fully
Make the transmitter point to the antenna without barrier
Keep the reciever away any digital equipment(such as CD,VCD,PC.or other
radio equipment)
7
Operation
System connection flow diagram
Unit Specification
Reciever
:
:
:
:
:
:
:
170-270.MHz VHF band
0.005%
FM
40Hz-18KHz( 3dB)
-0.8%
50-100M
-10-55 c
Frequency range
Frequency stability
Modulation
Frequency response
T.H.D
Distance
Temperture
Receiving system
Sensitivity
Removing weight
Audio output
Output connection
Power supply
Quartz crystal frequency
10UV/40DB emf
50ms
0-0.35Vp-p 5k
¦6.3 mm plug
DC:12-17 V
:
:
:
:
:
:
1.Please take the following working flow diagram for reference on using
this machine-connect the mix out of receiver with mic input on the amplifier
or out A,B,C,D and mic input on the amplifier.
2.Power 220V, switch the power, set the volume of your sound equipment.
3.Adjust the volume in right sound, make MIC1 and MIC2 harmony, which
will make you enjoying the sound well.
4.Please plug out the power if you will not use the machine long time.
TECHNICAL PARAMETERS SYSTEM