User Manual

1. Please take note of the following workflow diagram for reference on
connecting this machine.
2. Make sure your system is set to the correct power (110 V). Then set
the volume of your sound equipment.
3. Adjust the mix so that the users of MIC 1 and MIC 2 sound good
together.
4. Unplug the machine if you will not be using it for a long time.
- Keep the machine at least 3 feet above the ground and 3 feet
away from walls.
- Pull the antenna upright.
- Your equipment will operate best if there is no physical barrier
between the microphone and the receiving antenna.
- Keep the receiver away from digital equipment, such as CD
players, computers, or other radio equipment.