User Manual

PDWM91

Professional VHF Handheld Microphone

Pro Audio Wireless Mic Transmitter System with Adapter Receiver

www.PyleUSA.com

INSTRUCTIONS

RECEIVER

Handheld Transmitter

HOW TO USE?

1. Open the battery cover of the receiver, put 1AA battery inside the battery compartment. Make sure the “+ -”

polar is correct.

2. Turn ON/OFF swith to ON, the LED indicator is lit. Then insert the 1/4”(6.3mm) Input Jack into audio input

socket, the LED indicator is become brighter after receiving RF signals.

3. Install 2PCS AA batteries correctly in handheld transmitter or install 1PC 9 V battery correctly into the belt-

pack transmitter. Install the headset microphone to the beltpack input transmitter.

4. Turn ON the transmitter switch, the LED indicator is lit. Now the system is ready to use

Notice:

1. If there is any noise, distortion, dead points when using the this system, it may be caused from low battery,

please replace with new battery.

2. After using it, please turn the switch to “OFF”.

3. If you will not use this system for a long time, please take out the batteries.

Grill LED indicator

ON/OFF switch

Battery Cover 1/4”(6.3mm) input Jack

OFF

LED

ANT

PAGE 1
PDWM91 Professional VHF Handheld Microphone Pro Audio Wireless Mic Transmitter System with Adapter Receiver INSTRUCTIONS RECEIVER Battery Cover 1/4”(6.3mm) input Jack OFF ON LED ANT Handheld Transmitter ON/OFF switch Grill LED indicator HOW TO USE? 1. Open the battery cover of the receiver, put 1AA battery inside the battery compartment. Make sure the “+ -” polar is correct. 2. Turn ON/OFF swith to ON, the LED indicator is lit. Then insert the 1/4”(6.
PAGE 2
Features: What's in the Box: • Pro Audio Microphone System • Wireless Handheld Microphone • Handheld Wireless Mic & Receiver Adapter • Plug-in Adapter Receiver • VHF Narrow Band Audio Transmitter • Portable Battery-Operated Design • Simple Plug-and-Play Operation • Includes Plug-in Audio Adapter Receiver • Audio Receiver with 1/4'' -inch (6.