User Manual

www.PyleUSA.com

The PFA300 uses a Class-T audio amplier

IC for low distortion and acoustically

accurate reproduction of music.

Tone/direct switching allows for

customized listening via separate bass and

treble adjustments — or the original signal

can be passed through without enhancement.

The built-in loudspeaker protection circuit triggers

when the amplier is turned on to protect speakers from

high volume bursts of audio. Over-voltage protection circuit

shuts down the amplier if input voltage exceeds 14.4 V DC. State of the art design

using surf ace mount components and advanced engineering for proven perfor-

mance, reduced signal interference, and long operational life.

PFA300

90 Watt Class-T Hi-Fi Stereo Amplifier

with AC Adapter Included

PAGE 1
PFA300 90 Watt Class-T Hi-Fi Stereo Amplifier with AC Adapter Included The PFA300 uses a Class-T audio amplifier IC for low distortion and acoustically accurate reproduction of music. Tone/direct switching allows for customized listening via separate bass and treble adjustments — or the original signal can be passed through without enhancement. The built-in loudspeaker protection circuit triggers when the amplifier is turned on to protect speakers from high volume bursts of audio.
PAGE 2
Built-In Safety Features Short cut, overload, and overheat protection keeps this amp, as well as other connected devices, functioning properly and safe. The built-in loudspeaker protection circuit triggers when the amplifier is turned on to protect your speakers from high volume bursts of audio. Overload protection shuts down the amplifier if input voltage exceeds 14.4 volts. Features and Technical Specs: • 12V AC/DC Adapter • Class-T Circuit Design • Microphone Input Jack • Speaker Impedance: 2-8Ω • 3.