User Manual

www.PyleUSA.com
7
Next, pull the string up over the nut towards the headstock and
bend it around the tuning machine post toward the tuning machine
button, (Figure 6) Thread the string through the hole in the post and
begin winding the button to remove the slack in the string.
Continue winding to form a neat coil.
Finally, tune the string to the appropriate pitch. Pull up gently at the
center point of the string to stretch it.
Retune, and repeat, until unwanted slack is eliminated and the
tuning of the strings is stabilized this will prevent slipping and save
you tuning frustrations down the road.
illustration 6