'' Silk Dome Tweeter and Aluminum Voice Coils, Pair
To ensure you will be completely satisfied with this product, read and understand this manual carefully before use. Keep the manual in a safe place. The Operating Manual must be passed on to all subsequent users. IMPORTANT SAFETY PRECAUTIONS • Make sure to match your speaker and amplifier power ratings. Failure to do so can result in pennanent damage to your speakers. • Distortion is an indication that amplifier or speaker is operating beyond its design limits.
The Home Theater Bookshelf Speakers features 5-way binding posts which can accept various types of connections: 1. Banana plugs can be inserted into the open end of the binding post. 2. Spade tenninals can be placed around the metal post and clamped by the screw down cap. 3. Looped wire can be wrapped around the binding post and clamped by the screw down cap. 4. Straight wire can be inserted into the hole drilled through the bottom of the binding post and clamped down by the screw cap. 5.
POSITIONING THE SPEAKERS To place the speakers, start with them placed directly in front of your primary listening position. Make sure the tweeters are as close to ear level as possible. As you are listening to music, make sure to pay close attention to the quality and separation of vocals and instruments. You can move the speakers closer together or further apart to optimize your listening experience, but make sure they are set as far away from the listener as each other.
TROUBLESHOOTING PROBLEM No sound SOLUTION 1. Please make sure your speaker wires/connections are inserted completely into the speaker terminals and all connectors are properly seated. 2. These speakers require power, please make sure your receiver has amplified speaker outputs. If it does not, we are happy to help you find the right receiver or amplifier for your set up. Email us at support@pyleusa.com. 3. Please make sure your active audio source (cd, aux, tape, etc.) is selected on your receiver.
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
