PHUD18OBD HEAD UP DISPLAY User Manual HUD short for Head Up Display. It displays driving datas on the front windshield such as speed on the car front window glass; avoiding drivers unsafety because of watching the instrument while driving. Drivers can read the driving information instantly , and can always keep the best state on the way with HUD. HUD MAIN FUNCTIONS & FEATURES: 1. Available for cars with OBD2 and EUOBD port (Car automatic diagnosis system), plug and play 2. Screen 5.5 inch HD display 3.
1. Decorative light 2. Engine RPM 3. Speed 4. Speed unit (KM/H, MPH) 5. Multi-functional area 1：Engine RPM, voltage, single driving distance (KM,Mile), single driving time (Minutes), water temperature 6. Unit for multi-functional area 1 7. Multi-functional area 2: fuel consumption, single driving distance (KM,Mile) 8. Unit for multi-functional area 2 9.
HUD INSTALLATION : 1. Know your vehicle brand, HUD work for cars with OBDII agreement or EU OBD agreement. Open the engine hood and find the sticker below it (see the below picture 1), if it has words like OBDII CERTIFIED, then it can be installed. 2. Find out the 16 pin diagnostic link (see the below picture 2) of the vehicle and connect it well with OBDII connecting line. HUD SETTINGS: Car speedometer value has been adjusted high by car factory to make driving safe.
Menu 0 1 2 According Parameters Speed Range Adjustment 50-150 Explanation When the Speed is not the same as dashboard: Up or down the wave button to adjust Default Values 107 50-150 When RPM is not the same as dashboard: Up or down the wave button to adjust 117 Fuel 50-150 consumption When fuel consumption is not the same as dashboard: Up or down the wave button to adjust 100 RPM 3 Shifting reminding 1000 When RPM reaches -7500 5000, HUD will give 5000 RPM alarm 4 RPM alarm 1000 -7500
7 Brightness adjustment 0-2 0 is automatic adjustment, 1 is the darkest by manual, 2 is brightest by manual 8 Speed unit 1-2 1 is KM, 2 is MPH 2 9 Water temperature unit 1-2 1 for °C, 2 for °F 2 10 Mileage Unit 0-1 (switch between KM/Mile) 0 is single driving in KM, 1 is single driving in Mile 1 11 Emission setting 0-100 The default car emission is 20(means 2.0L) ,if there is no display fuel consumption,pls adjust the default value to 0 12 Reference start voltage If HUD cannot 0-15.
USE AND INSTALLATION FOR REFLECTION FILM: Please Note: HUD projects dashboard information on the car front windscreen , because the windscreen is double, which will make double reflection on the windscreen when it works. The double reflection will be different cause of the different windscreen. If you can see clear of the displaying information, then there is no need to use the reflection film. If there is a double image, then please use the reflection film.
2. HUD only shows the car voltage and be automatic power off after 30 second when it under the condition with electricity while driving. Reason: HUD just available for cars with OBD2 agreement and EU-OBD agreementEuropean region: after 03 years, Other region:after 07 years) HUD Products donnot support JOBD and OBDI and recommended test for another car. 3. See not clearly when HUD under the sunlight.
b. Driving mode: HUD display Instantaneous fuel consumption of 100Miles c. Finish driving: HUD display is average fuel consumption of 100Miles, when turn off the car, HUD will auto turn off in 10s. Under the condition with power,vertical press the wave button 5 seconds to enter into menu option, show press in 11 times to find menu 11, the default value is 20 (means the emission is 2.
