Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
Introduction Control Panel and Features With the PLBX10A, we are introducing a low-profile amplified subwoofer. Low enough to easily fit below the seat of your car. This system offers you a quick and easy way to add a high-powered subwoofer system to your audio system. The integrated amplifier in the PLBX10A features low pass crossovers, and a control for adjusting the input sensitivity from 0.12V to 3.5V.
Low Level Input Wiring Power Connections Low-level (RCA) input wiring is preferred for best audio performance. Most trunk or hatchback installations will require a 15-20 foot RCA cable, while pickup trunks and under-seat installations will require a 6-12 foot RCA cable. Always use a high quality cable. Connect the ground terminal to the closest point on the chassis of the vehicle. Keep this ground wire to less than 39” (100 cm) inlength. Use 8 gauge (or heavier) wire.
Troubleshooting Features: If you experience operation or performance problems with this product, compare your installation with the electrical wiring diagram on the previous pages. If problems persist, read the following troubleshooting tips which may help eliminate the problems. • 10" Slim Woofer • Low-Level RCA Input • High-Level Speaker Line Input PROBLEM POSSIBLE REASON SOLUTION • Blue LED Power Status Indicator • Red LED Protection Status Indicator NO +12v to power wire Not switching on.
