Owner`s manual

9
OPERATION
RADIO OPERATION
• SWITCHING TO RADIO MODE
Press MOD button (12) momentarily
to select radio mode, the radio mode
appears in the display together with
the memory band and frequency.
• SELECTING THE FREQUENCY
BAND
In radio mode, press BND/LOU (ENT)
button (11) momentarily to select the
desired band.
The reception band will change in the
following order:
• SELECTING STATION
Press
button (9) or button (10)
momentarily to activate automatic
seek function. Press for several
seconds until “MANUAL” appears on
the display, the manual tuning mode
is selected. If both buttons have not
been pressed for several seconds,
they will return to seek tuning mode
and “AUTO” appears on the display.
• AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic Memory Storing
Press AS/PS (D-AUD) button (25)
for several seconds, the radio
searches from the current frequency
and checks the signal strength until
one cycle search is finished. Then 6
strongest stations are stored into the
corresponding preset number
button.
- Program Scanning
Press AS/PS (D-AUD) button (25)
momentarily to scan preset stations.
When the field strength level is more
than the threshold level of stop level,
the radio will hold at that preset
number for several seconds with
mute, then search again.
• STATION STORING
Press any one of the preset buttons
(17) (1 to 6) to select a station, which
had been stored in the memory. Hold
the preset button (17) for several
seconds(until it beeps) to assign the
current station to the specific button
pressed.
• LOCAL/DISTANT
Press LOC button (22) to select
between local and distant stations.
Local setting for reception of strong
stations, and a distant setting for
reception of weaker stations. This
function is in effect during AUTO SEEK
operation.
MONO/STEREO
Press MON button (21) to select mono
or stereo mode. You can sometimes
improve reception of distant stations
by selection mono operation.
FM1 FM2 FM3 AM