PLCD9MR OWNER’S MANUAL Mobile Audio System • CD Player • PLL Synthesizer Stereo Radio • Compact Disc Player • Automatic Memory Storing • Full Detachable Panel • Preset Equalization • Electronic Shockproof (ESP) Function • Auxiliary Input Function • Remote Control www.pyleaudio.
CONTENTS Installation ...........................................3 Repeating the same track.................10 Take out screw before installation.........3 Playing all tracks in random..............11 DIN Front-Mount (Method A) ................3 Ejecting a disc ..................................11 Installing the unit.................................3 Remote Control Handset ....................12 Removing the unit...............................4 Disc notes ...........................................
INSTALLATION Notes: TAKE OUT SCREW BEFORE INSTALLATION • Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before install the unit, please remove the two screws. Take out screw before installation • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. • Use only the parts included with the unit to ensure proper installation.
INSTALLATION grounding of the unit. Note to install the short threading terminal of the mounting bolt to the back of the unit and the other long threading terminal to the dashboard. Sleeve L Key Outer Trim Ring Front Panel Spring Washer Hex Nut Metal Strap R Key Mounting Bolt Plain Washer Tapping Screw 6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver.
INSTALLATION DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle. Side view showing Screw Holes marked T, N Factory Radio Mounting Bracket Screw Screw Dashboard or Console To fasten the unit to the factory radio mounting brackets.
USING THE DETACHABLE FRONT PANEL REMOVING THE FRONT PANEL 1. Press the release button (RELEASE) on the front panel and pull off the front panel. Precautions when handing 1. Do not drop the front panel. 2. Do not put pressure on the display or control buttons when removing or installing the front panel. 3. Do not touch the contacts on the front panel or on the main unit body. It may result in poor electrical contact. 4.
WIRING CONNECTION MAIN UNIT ANTENNA CONNECTOR RED IGNITION SWITCH (ACC+) MEMORY BACK-UP (B+) YELLOW FUSE FUSE (GREY) RCA CABLE BLACK Lch WHITE GROUND (B–) POWER ANTENNA FRONT Lch SPEAKER REAR Lch SPEAKER Rch RED BLUE WHITE GREY WHITE/BLACK GREY/BLACK GREEN VIOLET GREEN/BLACK VIOLET/BLACK 7 FRONT Rch SPEAKER REAR Rch SPEAKER
OPERATION LOCATION OF KEYS 3 16 7 6 12 15 17 19 13 5 18 20 8 21 22 14 23 26 11 1 2 24 8 4 25 9 10
OPERATION SWITCHING ON/OFF THE UNIT Switch on the unit by pressing any button button (7) and button (4)). (except When system is on, press button (9) to turn off the unit. press the button (17) to change hours button (16) to change minutes. or MUTE In radio and AUX mode, press MUTE button (3) to mute down sound. Press it again to release this mode and recover previous volume level. FACEPLATE RELEASE Press button (7) to detach the removable faceplate.
OPERATION 2ND beeps come out ), current station is stored into the number button. RADIO OPERATION • SWITCHING TO RADIO MODE Press MODE button (6) shortly to select radio mode, the radio mode appears in the display together with the memory band and frequency. • LOCAL/DISTANT Press LOC button (2) to select between local and distant stations. Local setting for reception of strong station, and a distant setting for reception of weaker stations. This function is effect during AUTO SEEK operation.
OPERATION • PLAYING ALL TRACKS IN RANDOM Press SHF button (23) to play all tracks on CD in random order. Press again to cancel the function. • EJECTING A DISC Press button (4) to stop CD playing and eject the disc from the disc slot (5).
REMOTE CONTROL HANDSET 1 7 4 3 8 9 6 5 13 2 12 14 11 10 16 15 FUNCTION KEYS & CONTROL 1. PWR Power ON/OFF Button 2. DSP Display Button 3. SEL Sound Mode Select Button 4. VOL Volume Up Button 5. VOL Volume Down Button 6. BND (LOU) Band Select Button (When pressed shortly) 7. MODE Mode Button 8. TUNE/SKIP/CH Tune/SKIP Down Button 9. TUNE/SKIP/CH Tune/SKIP Up Button Loudness Button (When pressed long) 10.
OPERATION DISC NOTE A. Notes on discs: 1. Attempting to use non-standard shape discs (e.g. square, star, heart) may damage the unit. Be sure to use round shape CD discs only for this unit. 2. Do not stick paper or tape etc., onto the label side or the recording side of any discs, as it may cause a malfunction. 3. Dirt, dust, scratches and warping discs will cause misoperation. B. Notes on CD-Rs (recordable CDs)/CD-RWs (rewritable CDs): 1.
SPECIFICATION GENERAL Power Supply Requirements Chassis Dimensions Tone Controls - Bass (at 100 Hz) - Treble (at 10 KHz) Maximum Output Power Current Drain : DC 12 Volts, Negative Ground : 178 (W) x 160 (D) x 50 (H) : : : : ± 10 dB ± 10 dB 4 x 40 Watts 5 Ampere (max.) CD PLAYER Signal to Noise Ratio Channel Separation Frequency Response : More than 55 dB : More than 45 dB : 40 Hz - 18 KHz RADIO FM 87.5 to 107.9 MHz 10.
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom No power. Disc cannot be loaded or ejected. Cause Solution The car ignition switch is not on. If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Presence of CD disc inside the player.
