MOBILE AUDIO SYSTEM PLCDBT65MRW USER MANUAL
CONTENTS Installation............................................. 3 DISPLAY INFORMATION .................. 9 USB play operation ........................... 9 SD operation ..................................... 9 Disc notes.......................................... 10 Bluetooth Operation .......................... 11 Remote Control Handset ................... 12 Specification ...................................... 13 Trouble shooting ................................ 14 Take out screw before installation ..
INSTALLATION Notes: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
INSTALLATION Screw (5x25mm) and Plain Washer) to attach the other end of metal strap to a solid metal part of the vehicle under the dashboard. This strap also helps ensure proper electrical grounding of the unit. Note to install the short threading terminal of the mounting bolt to the back of the unit and the other long threading Spring Washer Hex Nut terminal to the dashboard. Metal Strap Mounting Bolt Plain Washer Tapping Screw Reconnect the cable to the vehicle battery’s negative (-) terminal.
WIRING CONNECTION 5
OPERATION LOCATION OF KEYS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. “BAND” / button. “MODE”/ button. “ ” button “Vol /SEL” button “AMS” button “ ” Seek down button “DISP” button. “ ” Seek up button. IR Sensor LCD display Eject button 12. 13. 14. 15. 16. 17. 18. 19 20. 21. 6 USB port AUX jack SD slot “6 DIR+” button. “5 DIR-” button. “4 RDM” button. “3 RPT” button. “2 INT” button. “ ” button.
OPERATION TURN ON/OFF THE UNIT Press button (3) to turn on the unit. When the unit is on. Press and hold it for 2 seconds to turn off the unit. Rotating the audio knob (4) to change the minute. Then press DISP button to confirm. LIQUID CRYSTAL DISPLAY Exhibit current frequency and activated functions on the display. SOUND ADJUSTMENT Press SEL button (4) shortly to select the desired adjustment mode.
OPERATION shortly to activate automatic seek function. It will search up/down a station automatically. Press for 2 seconds until “MANUAL” appears on the display, the manual tuning mode is selected. In this mode you can turn up/down a step frequency one by one till searched a station. If both buttons have not been pressed for 5 seconds, it will return to seek tuning mode and “AUTO” appears on the display. begins.
OPERATION DISP button (7) is assigned as selection button in MP3/WMA operation. When pressed, it is activated as selecting each mode as below: Search file number => Search File Name=>Search from folder. KEY Assigned IN Searching mode (Table 1) Searching Track Directly Press AS/PS button for one time. It enters into “Searching file number” mode. Rotating knob (4) to select the file number then press knob (4) to confirm. The unit searches the selected file to play.
OPERATION Different models have their own standards. So our product cannot support every MP3 player. When connecting an MP3 player and there has normal battery in the player (non rechargeable battery), you should remove the battery from the MP3 player then connect it to the USB interface. Otherwise, it may cause battery burst. disc that has important files in it. Because any wrong operation may cause files loss. And our company assumes no responsibility for this. DISC NOTES A.
OPERATION this unit. (see *1) *1: To have more reliable play back, please see following recommendations: a: Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x. b. Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x. c. Do not play a CD-RW which has been written for more than 5 times. instruction manual of your mobile phone on how to operate Bluetooth.) 2) “CAR BIT” should appear in the list on your mobile phone, please select “CAR BIT” and then input password “0000”.
REMOTE CONTROL HANDSET (OPTIONAL) FUNCTION KEY & CONTROL 1. POWER 2. MODE 3. BND 4. VOL+ 5. TUNE/SKIP 6. SEL 7. EQ 8. VOL9. 10. 11. 12. 13. 14. 15. 16. 17. 1/PAU 2/INT 4/RDM 5/DIR6/DIR+ 3/RPT DISP TUNE/SKIP AMS 18.
SPECIFICATION GENERAL Power Supply Requirements Chassis Dimensions Tone Controls - Bass (at 100 Hz) - Treble (at 10 kHz) Maximum Output Power Current Drain : DC 12 Volts, Negative Ground : 178 (W) x 160 (D) x 50 (H) : ±10 dB : ±10 dB : 4x40 watts : 10 Ampere (max.) (For Normal Power Version) CD PLAYER Signal to Noise Ratio Channel Separation Frequency Response : More than 55 dB : More than 45 dB : 40Hz – 18 kHz RADIO Frequency Coverage IF Sensitivity (S/N=30dB) Stereo Separation FM 87.5 to 107.
TROUBLE SHOOTING Before going through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer. Symptom No power. Disc cannot be loaded or ejected. No sound. Cause Solution The car ignition switch is not on. If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Presence of CD inside the player.
