PLCMTR ‐ Commercial Grade Camera System www.pyleaudio.com Please read instructions carefully before installation and use. Installation should be performed by a professional installer. To ensure your safety, the driver should not watch videos or operate features on the monitor while driving. There are no serviceable parts in this unit, do not disassemble or try to repair this unit. If the unit malfunctions please return to your vendor or send to a Pyle repair facility.
PLCMTR ‐ Commercial Grade Camera System www.pyleaudio.com Wiring & Connection *When the Green ‐ Reverse Trigger ‐ is connected, the system will automatically revert to this connection Red: Power 12/24V once the vehicle is placed into reverse gear. This is connected to the camera via 4‐Pin connection. Black: GND Green: +12V Reverse *The monitor controls allow the user to *Please note: The monitor may include a adjust picture settings horizontal or 'volume' function in the menu settings.
PLCMTR ‐ Commercial Grade Camera System www.pyleaudio.com The video monitor is provided power and camera video signals via the video and power wiring harness. From the monitor, you will be able to control Ch. 1, Ch. 2, input video cameras (V1, V2,). The power and video wiring harness includes an RCA (video) connector for you to install an additional video input source.
PLCMTR ‐ Commercial Grade Camera System www.pyleaudio.com 1. Set the mount stand in the desired location, then use screws to secure the mount stand into location. Please make sure as to set a location free from vehicle obstruction including any wiring, or location where it may obstruct the driver's view, driving conditions, etc. 2. Attach the metal buckle piece on top of the fan shaped mount stand, and slide it into the receiving slot in back of the display monitor assembly.
